On Thu, 13 Jan 2011 08:47:14 +0100 Romain De Rasse <[email protected]> wrote:
> Hi, > > I'm setting up an IPSec VPN tunnel with a Juniper SSG140 appliance > and I'm having an issue. The Juniper type of IPSec VPN is route-based > Dialup VPN. > When the client device is connected to the VPN, it's still able to > access the local LAN even if I use an "IPsec Policy Manual > Configuration" along with this "Topology Entry" : > - Type : Include > - Address : 0.0.0.0 > - Netmask : 0.0.0.0 > > Is there a way to prevent the connected client device from accessing > the local LAN ? > Hi roms, When you do a route-based VPN on NetScreen, that can be made into a bi-directional tunnel. You should try doing a traceroute (tracert in Windows CMD prompt) to see if your traffic is actually going out to the gateway and then coming back. If that is what is happening, then you need to put a rule preventing the local LAN access on the NetScreen. Alternatively, is there a chance that you have both a wired and wireless connection on your PC, and that the local LAN access is happening via the other adapter? _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
