On 1/28/2011 5:45 PM, Brian Harmer wrote:
Don wrote:
I am hoping the community can help me with this.
I am using a Windows 7 64bit OS on my laptop and have used the NCP
applcation (trial) in the successfully in the past. However, with
Shrew's client, I can authenticate, but right after the
splashscreen that tells me to behave myself on he corporate
network, I get a disconnect by gateway. I have no idea what is
happening that the gateway disconnects me after an appearent
successful negotiation and authentication. Anyone seen this before
and have any ideas?
bringing up tunnel ... network device configured tunnel enabled
session terminated by gateway tunnel disabled detached from key
daemon ...
I have a similiar experience. I can add to that the fact that in the
box which shrinks to the task bar on the "apparently" successful
connection, there are two tabs, one labelled connect, and the other
labelled network. If I watch the newtork tab while the system is
thinking about finally connecting, I can see that the client tells me
that security associations failed .... 9 times ... is that 9
associations or 9 tries? As a VPN novice despearate to connect, I
have no idea what this means. Any insights gratefully received.
This is the typical result when the VPN client connects to a Cisco
gateway and phase2 negotiation is failing for some reason. Check the log
output on both the client and gateway to find clues as to what the issue
could be. You will likely need to modify either a phase2 tab or a policy
tab parameter in your site configuration.
-Matthew
_______________________________________________
vpn-help mailing list
[email protected]
http://lists.shrew.net/mailman/listinfo/vpn-help
