On Fri, Mar 28, 2014 at 3:03 PM, Bil Click <[email protected]> wrote:
> Log set to record errors. Reported this when I tried to reconnect this > morning. > > Connection Client says "tunnel enabled" > > > > 14/03/28 09:47:40 ## : IKE Daemon, ver 2.1.7 > > 14/03/28 09:47:40 ## : Copyright 2010 Shrew Soft Inc. > > 14/03/28 09:47:40 ## : This product linked OpenSSL 0.9.8h 28 May 2008 > > 14/03/28 09:47:54 !! : unable to locate inbound policy for init phase2 > > 14/03/28 09:47:54 !! : unable to locate inbound policy for init phase2 > > 14/03/28 09:47:55 !! : peer violates RFC, transform number mismatch ( 1 != > 14 ) > > 14/03/28 09:47:55 !! : peer violates RFC, transform number mismatch ( 1 != > 14 ) > > 14/03/28 09:48:27 !! : unable to locate inbound policy for init phase2 > > 14/03/28 09:48:27 !! : unable to locate inbound policy for init phase2 > > 14/03/28 09:48:27 !! : peer violates RFC, transform number mismatch ( 1 != > 14 ) > > 14/03/28 09:48:27 !! : peer violates RFC, transform number mismatch ( 1 != > 14 ) > > 14/03/28 09:54:22 !! : unable to locate inbound policy for init phase2 > > 14/03/28 09:54:22 !! : unable to locate inbound policy for init phase2 > > 14/03/28 09:54:22 !! : peer violates RFC, transform number mismatch ( 1 != > 14 ) > > 14/03/28 09:54:22 !! : peer violates RFC, transform number mismatch ( 1 != > 14 ) > > > Hi Bill, In Network tab, in Security Associations, Established is always to 0 ? You need to check Phase 2 settings and Policy settings Regards, > > > > > > > *From:* [email protected] [mailto:[email protected]] *On Behalf Of *Alexis > La Goutte > *Sent:* Wednesday, March 26, 2014 2:25 PM > > *To:* Bil Click > *Cc:* [email protected] > *Subject:* Re: [vpn-help] W7 Will Not Reconnect > > > > There is a another tools installed with Shrew VPN Client to see logs (VPN > Trace) > > https://www.shrew.net/static/help-2.1.x/vpnhelp.htm?VPNTrace.html > > Regards, > > > > On Wed, Mar 26, 2014 at 7:05 PM, Bil Click <[email protected]> wrote: > > Sorry _ don't know what you mean by "With Shrew VPN Log... " > > > > > > *From:* [email protected] [mailto:[email protected]] *On Behalf Of *Alexis > La Goutte > *Sent:* Wednesday, March 26, 2014 1:37 PM > > > *To:* Bil Click > *Cc:* [email protected] > *Subject:* Re: [vpn-help] W7 Will Not Reconnect > > > > > > > > On Wed, Mar 26, 2014 at 6:35 PM, Bil Click <[email protected]> wrote: > > Thanks for reply. > > > > By "disable", do you mean is tunnel disconnected? > > Yes > > > > Where do I find the logs? > > > > With Shrew VPN Log... > > > > > > *From:* [email protected] [mailto:[email protected]] *On Behalf Of *Alexis > La Goutte > *Sent:* Wednesday, March 26, 2014 1:10 PM > *To:* Bil Click > *Cc:* [email protected] > *Subject:* Re: [vpn-help] W7 Will Not Reconnect > > > > Hi, > > Before sleeping, the tunnel is disable ? > > What say logs ? > > Regards, > > > > On Wed, Mar 26, 2014 at 4:44 PM, Bil Click <[email protected]> wrote: > > I am running ShrewSoft VPN Client 2.1.7 on two Windows 7 Ultimate 64 bit > machines. > > > > I usually put the machines in "Sleep" mode at night. When I start back up > in the morning, the VPN will not connect unless the computer is rebooted. > > > > Bil Click > > *[image: CourtLogic LOGO]* > > > > > _______________________________________________ > vpn-help mailing list > [email protected] > https://lists.shrew.net/mailman/listinfo/vpn-help > > > > > > >
<<inline: image001.jpg>>
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
