Thanks Jason... Even if I send a continuous ping on both side of the tunnel I don't see any traffic :-(
Michael 2014-08-13 22:33 GMT+02:00 Jason Lewis <[email protected]>: > Michael, > > > > You may be experiencing the same problem I am. Try this and see: > > 1. Connect to your VPN > > 2. Immediately start a continuous ping to a system on the other > side of the tunnel. > > 3. See if the ping works for about 30 seconds then dies. > > > > I haven’t had a lot of time to troubleshoot this, but I suspect it has > something to do with the Linux-specific code. I could be wrong. > > > > Jason Lewis > > Systems Administrator - *2Checkout* <https://www.2checkout.com/> > > --------------------------------------------------------------------- > > [email protected] > > 1.614.921.2450 x127 > > 1.614. 260.3967 (mobile) > > > > *From:* vpn-help [mailto:[email protected]] *On Behalf Of > *Michael > FROMENT > *Sent:* Wednesday, August 13, 2014 4:26 PM > *To:* [email protected] > *Subject:* [vpn-help] Ubuntu 14.04 > > > > Hello, > > I've just setup shrew 2.2 on my ubuntu 14.04 and setup a connection to my > Juniper SSG device (PSK+Xauth). > > The tunnel is up, I get the correct route on my device but there is > absolutely no traffic on my tap device. > > The same setup with shrew 2.2 under windows is working. > > Do you have an ideas about this issue? > > Michael > All information in this email is subject to the 2Checkout > confidentiality statement. > <https://www.2checkout.com/policies/confidentiality-statement> >
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
