...any ideas, what the problem could be?? Mit freundlichen Grüßen / With best regards
Manfred Horwath, Ing Senior Engineer Software Realtime Systems /DRXP (PLC) KNAPP AG Guenter-Knapp-Str. 5-7 8075 Hart bei Graz, Austria Phone: +43 5 04952-1866 Mobile: +43 676 8979 1866 Fax: +43 5 0495299-1866 [email protected] www.knapp.com Commercial register number: FN 168434y Commercial register court: Graz DVR: 0384861 The information in this e-mail (including any attachment) is confidential and intended to be for the use of the addressee(s) only. If you have received the e-mail by mistake, any disclosure, copy, distribution or use of the contents of the e-mail is prohibited, and you must delete the e-mail from your system. As e-mail can be changed electronically KNAPP assumes no responsibility for any alteration to this e-mail or its attachments. KNAPP has taken every reasonable precaution to ensure that any attachment to this e-mail has been swept for virus. However, KNAPP does not accept any liability for damage sustained as a result of such attachment being virus infected and strongly recommend that you carry out your own virus check before opening any attachment. Von: Alexis La Goutte <[email protected]> An: Manfred Horwath <[email protected]>, Kopie: "[email protected]" <[email protected]> Datum: 18.11.2015 15:53 Betreff: Re: [vpn-help] HTTP request through IPSec tunnel fails Gesendet von: [email protected] Hi, No, there is no limitation with Shrew. Regards, On Wed, Nov 18, 2015 at 2:18 PM, Manfred Horwath < [email protected]> wrote: Hi, i'm using the ShrewSoft Client to connect to a Siemens PLC Gateway (CP343-1 Advanced). The connection is established ok and i'm able to ping all nodes through IPSec tunnel. I'm also able to open a website of one node, but not from a different node! I do not experience this problem with another IPSec Client Software (NCP Security Client), which i've tested (but this client causes another problem!). Does anyone no, if the standard ShrewSoft Client is limited in any way or could it be a simple configuration fault? VPN Client Version = Standard Edition Version 2.2.2 Windows OS Version = Windows7 Enterprise SP1 64 Bit Gateway Make/Model = Siemens CP343-1 Advanced Gateway OS Version = 3.0 Mit freundlichen Grüßen / With best regards Manfred Horwath, Ing Senior Engineer Software Realtime Systems /DRXP (PLC) KNAPP AG Guenter-Knapp-Str. 5-7 8075 Hart bei Graz, Austria Phone: +43 5 04952-1866 Mobile: +43 676 8979 1866 Fax: +43 5 0495299-1866 [email protected] www.knapp.com Commercial register number: FN 168434y Commercial register court: Graz DVR: 0384861 The information in this e-mail (including any attachment) is confidential and intended to be for the use of the addressee(s) only. If you have received the e-mail by mistake, any disclosure, copy, distribution or use of the contents of the e-mail is prohibited, and you must delete the e-mail from your system. As e-mail can be changed electronically KNAPP assumes no responsibility for any alteration to this e-mail or its attachments. KNAPP has taken every reasonable precaution to ensure that any attachment to this e-mail has been swept for virus. However, KNAPP does not accept any liability for damage sustained as a result of such attachment being virus infected and strongly recommend that you carry out your own virus check before opening any attachment. _______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
