Unfortunately it failed again... :( It seems that packet has been correctly
processed in DUT1 but didn't reach DUT2:
Packet trace form DUT1:
Packet 1
00:00:13:305429: dpdk-input
GigabitEthernet0/4/0 rx queue 0
buffer 0x4e03: current data 0, length 60, free-list 0, totlen-nifb 0, trace
0x0
PKT MBUF: port 0, nb_segs 1, pkt_len 60
buf_len 2176, data_len 60, ol_flags 0x0, data_off 128, phys_addr 0x5ad33fc0
packet_type 0x0
IP4: fa:16:3e:3d:5f:7c -> fa:16:3e:70:a8:34
ICMP: 192.168.100.1 -> 192.168.100.2
tos 0x00, ttl 64, length 28, checksum 0x318c
fragment id 0x0001
ICMP echo_request checksum 0xf7ff
00:00:13:305463: ethernet-input
IP4: fa:16:3e:3d:5f:7c -> fa:16:3e:70:a8:34
00:00:13:305473: l2-input
l2-input: sw_if_index 1 dst fa:16:3e:70:a8:34 src fa:16:3e:3d:5f:7c
00:00:13:305476: l2-learn
l2-learn: sw_if_index 1 dst fa:16:3e:70:a8:34 src fa:16:3e:3d:5f:7c bd_index 1
00:00:13:305482: l2-fwd
l2-fwd: sw_if_index 1 dst fa:16:3e:70:a8:34 src fa:16:3e:3d:5f:7c bd_index 1
00:00:13:305485: l2-flood
l2-flood: sw_if_index 1 dst fa:16:3e:70:a8:34 src fa:16:3e:3d:5f:7c bd_index 1
00:00:13:305486: l2-output
l2-output: sw_if_index 6 dst fa:16:3e:70:a8:34 src fa:16:3e:3d:5f:7c
00:00:13:305508: vxlan4-encap
VXLAN encap to vxlan_tunnel0 vni 23
00:00:13:305511: ip4-load-balance
fib 6 dpo-idx 14 flow hash: 0x00000000
UDP: 172.16.0.1 -> 172.16.0.2
tos 0x00, ttl 254, length 96, checksum 0x6469
fragment id 0x0000
UDP: 41828 -> 4789
length 76, checksum 0x0000
00:00:13:305516: ip4-rewrite
tx_sw_if_index 5 dpo-idx 2 : ipv4 via 172.16.0.2 GigabitEthernet0/6/0.10:
IP4: fa:16:3e:60:21:23 -> fa:16:3e:52:55:ca 802.1q vlan 10 flow hash: 0x00000000
IP4: fa:16:3e:60:21:23 -> fa:16:3e:52:55:ca 802.1q vlan 10
UDP: 172.16.0.1 -> 172.16.0.2
tos 0x00, ttl 253, length 96, checksum 0x6569
fragment id 0x0000
UDP: 41828 -> 4789
length 76, checksum 0x0000
00:00:13:305521: GigabitEthernet0/6/0-output
GigabitEthernet0/6/0.10
IP4: fa:16:3e:60:21:23 -> fa:16:3e:52:55:ca 802.1q vlan 10
UDP: 172.16.0.1 -> 172.16.0.2
tos 0x00, ttl 253, length 96, checksum 0x6569
fragment id 0x0000
UDP: 41828 -> 4789
length 76, checksum 0x0000
00:00:13:305524: GigabitEthernet0/6/0-tx
GigabitEthernet0/6/0 tx queue 0
buffer 0x4e03: current data -54, length 114, free-list 0, totlen-nifb 0,
trace 0x0
IP4: fa:16:3e:60:21:23 -> fa:16:3e:52:55:ca 802.1q vlan 10
UDP: 172.16.0.1 -> 172.16.0.2
tos 0x00, ttl 253, length 96, checksum 0x6569
fragment id 0x0000
UDP: 41828 -> 4789
length 76, checksum 0x0000
Packet trace form DUT2:
No packets in trace buffer
Anyway, it has passed with vpp build 17.04-rc0~64-gf952692~b1689_amd64 as well
as vpp build 17.01-rc2~5-g257d5e2~b17_amd64.
I forced recheck with newer vpp build from the master:
17.04-rc0~105-g5a3a6c0~b1730_amd64 for sure.
From: [email protected] [mailto:[email protected]] On
Behalf Of Jan Gelety -X (jgelety - PANTHEON TECHNOLOGIES at Cisco)
Sent: Tuesday, January 17, 2017 15:16
To: Damjan Marion (damarion) <[email protected]>
Cc: [email protected]; vpp-dev <[email protected]>
Subject: Re: [csit-dev] [vpp-dev] sporadically failing functional tests: L2BD
and VXLANoIPv4oVLAN
Hello Damjan,
Needed fix has been merged to master and cherry-picked to csit branch
oper-170108 that is currently used to verify vpp patch.
I did recheck on your commit https://gerrit.fd.io/r/#/c/4613/14 - it should
pass now. We will keep our eyes on it.
Regards,
Jan
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Matej Klotton -X (mklotton -
PANTHEON TECHNOLOGIES at Cisco)
Sent: Tuesday, January 17, 2017 10:29
To: Damjan Marion (damarion) <[email protected]<mailto:[email protected]>>;
[email protected]<mailto:[email protected]>
Cc: vpp-dev <[email protected]<mailto:[email protected]>>
Subject: Re: [vpp-dev] [csit-dev] sporadically failing functional tests: L2BD
and VXLANoIPv4oVLAN
I'll fix the test cases.
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Damjan Marion (damarion)
Sent: 16. januára 2017 22:39
To: [email protected]<mailto:[email protected]>
Cc: vpp-dev <[email protected]<mailto:[email protected]>>
Subject: Re: [vpp-dev] [csit-dev] sporadically failing functional tests: L2BD
and VXLANoIPv4oVLAN
Can we please disable this test temporary as tests are failing?
Thanks,
Damjan
On 16 Jan 2017, at 17:12, Maciek Konstantynowicz (mkonstan)
<[email protected]<mailto:[email protected]>> wrote:
Hi, Got the report above are failing from time to time:
https://jenkins.fd.io/job/vpp-csit-verify-virl-master/3316/
https://jenkins.fd.io/job/vpp-csit-verify-virl-master/3316/robot/
https://jenkins.fd.io/job/vpp-csit-verify-virl-master/3313/
https://jenkins.fd.io/job/vpp-csit-verify-virl-master/3312/
https://jenkins.fd.io/job/vpp-csit-verify-virl-master/3311/
Could someone have a look ?
-Maciek
_______________________________________________
csit-dev mailing list
[email protected]<mailto:[email protected]>
https://lists.fd.io/mailman/listinfo/csit-dev
_______________________________________________
vpp-dev mailing list
[email protected]
https://lists.fd.io/mailman/listinfo/vpp-dev
