I've just found that VPP has problem with QLogic interface.
Any idea if it is problem of VPP or DPDK?
Is it something what can be easy fixed?
I am thinking to try different version of NIC firmware..
root@frinxblade16:~# service vpp status
* vpp.service - vector packet processing engine
Loaded: loaded (/lib/systemd/system/vpp.service; enabled; vendor preset:
enabled)
Active: active (running) since Fri 2017-02-10 16:41:32 CET; 1min 22s ago
Process: 3503 ExecStartPre=/sbin/modprobe igb_uio (code=exited,
status=0/SUCCESS)
Process: 3484 ExecStartPre=/bin/rm -f /dev/shm/db /dev/shm/global_vm
/dev/shm/vpe-api (code=exited, status=0/SUCCESS)
Main PID: 3521 (vpp_main)
Tasks: 3
Memory: 36.0M
CPU: 1min 21.730s
CGroup: /system.slice/vpp.service
`-3521 /usr/bin/vpp -c /etc/vpp/startup.conf
Feb 10 16:41:32 frinxblade16 systemd[1]: Starting vector packet processing
engine...
Feb 10 16:41:32 frinxblade16 systemd[1]: Started vector packet processing
engine.
Feb 10 16:41:32 frinxblade16 vpp[3521]: vlib_plugin_early_init:213: plugin path
/usr/lib/vpp_plugins
Feb 10 16:41:32 frinxblade16 vpp[3521]: /usr/bin/vpp[3521]:
dpdk_bind_devices_to_uio:871: Unsupported Ethernet PCI device 0x14e4:0x168e
found at PCI address 0000:01:00.1
Feb 10 16:41:32 frinxblade16 /usr/bin/vpp[3521]: dpdk_bind_devices_to_uio:871:
Unsupported Ethernet PCI device 0x14e4:0x168e found at PCI address 0000:01:00.1
Feb 10 16:41:32 frinxblade16 vpp[3521]: EAL: Detected 56 lcore(s)
Feb 10 16:41:32 frinxblade16 vpp[3521]: EAL: No free hugepages reported in
hugepages-1048576kB
Feb 10 16:41:32 frinxblade16 vpp[3521]: EAL: Probing VFIO support...
Feb 10 16:41:32 frinxblade16 vnet[3521]: EAL: Probing VFIO support...
Feb 10 16:41:32 frinxblade16 vnet[3521]: dpdk_lib_init:304: DPDK drivers found
no ports...
Thank you,
Martin Šuňal
Technical Leader
Frinx s.r.o.
Mlynské Nivy 48 / 821 09 Bratislava / Slovakia
+421 2 20 91 01 41 / [email protected]<mailto:[email protected]> /
www.frinx.io<http://www.frinx.io/>
[frinx_logo]
From: Martin Šuňal
Sent: Friday, February 10, 2017 12:21 PM
To: '[email protected]' <[email protected]>
Subject: VPP cannot find interface QLogic 57810
Hello,
I have a problem that VPP cannot find QLogic 57810 interface.
I use Ubuntu 16.04 LTS and VPP 17.01 which was installed like this:
echo "deb [trusted=yes]
https://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main/ ./" | sudo
tee -a /etc/apt/sources.list.d/99fd.io.list
sudo apt update
sudo apt install vpp vpp-lib vpp-dpdk-dkms
I have 2 QLogic interfaces on a server and I want to put interface "eno2" into
VPP.
Here are some outputs:
root@frinxblade10:~# uname -a
Linux frinxblade10 4.4.0-62-generic #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC 2017
x86_64 x86_64 x86_64 GNU/Linux
root@frinxblade10:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq portid
b4e10f8a6e56 state UP group default qlen 1000
link/ether b4:e1:0f:8a:6e:56 brd ff:ff:ff:ff:ff:ff
inet 10.10.193.20/24 brd 10.10.193.255 scope global eno1
valid_lft forever preferred_lft forever
inet6 fe80::b6e1:fff:fe8a:6e56/64 scope link
valid_lft forever preferred_lft forever
3: eno2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop portid b4e10f8a6e59 state
DOWN group default qlen 1000
link/ether b4:e1:0f:8a:6e:59 brd ff:ff:ff:ff:ff:ff
root@frinxblade10:~# ethtool -i eno2
driver: bnx2x
version: 1.712.30-0
firmware-version: FFV7.12.19 bc 7.12.5
expansion-rom-version:
bus-info: 0000:01:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
root@frinxblade10:~# lshw -class network -businfo
Bus info Device Class Description
========================================================
pci@0000:01:00.0<mailto:pci@0000:01:00.0> eno1 network NetXtreme
II BCM57810 10 Gigabit Ethernet
pci@0000:01:00.1<mailto:pci@0000:01:00.1> eno2 network NetXtreme
II BCM57810 10 Gigabit Ethernet
vpp# sh pci
Address Socket VID:PID Link Speed Driver Product Name
0000:01:00.0 0 14e4:168e 5.0 GT/s x8 bnx2x QLogic 57810
10 Gigabit Ethernet
0000:01:00.1 0 14e4:168e 5.0 GT/s x8 bnx2x QLogic 57810
10 Gigabit Ethernet
vpp# sh int
Name Idx State Counter Count
local0 0 down
I also tried to add this into /etc/vpp/startup.conf
dpdk {
dev 0000:01:00.1
}
and it did not change anything.
No errors in /tmp/vpp.log
Any idea?
Thank you,
Martin Šuňal
Technical Leader
Frinx s.r.o.
Mlynské Nivy 48 / 821 09 Bratislava / Slovakia
+421 2 20 91 01 41 / [email protected]<mailto:[email protected]> /
www.frinx.io<http://www.frinx.io/>
[frinx_logo]
_______________________________________________
vpp-dev mailing list
[email protected]
https://lists.fd.io/mailman/listinfo/vpp-dev
