Hi,
I am trying to use the clib_socket interface to process a udp multical stream
being received by fd.io interface.
I followed the example in test_socket.c. I am registering for the stream as
follows:
s->config = "232.0.0.1:5001";
..
error = clib_socket_init (s);
..
error = clib_socket_rx (s, 100);
The packets being received are as follows:
03:16:18:555288: dpdk-input
GigabitEthernet6/0/3 rx queue 0
buffer 0x1bf26a1: current data 14, length 1428, free-list 0, clone-count 0,
totlen-nifb 0, trace 0x9
PKT MBUF: port 0, nb_segs 1, pkt_len 1442
buf_len 2176, data_len 1442, ol_flags 0x180, data_off 128, phys_addr
0x72696740
packet_type 0x211
Packet Offload Flags
PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid
PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid
Packet Types
RTE_PTYPE_L2_ETHER (0x0001) Ethernet packet
RTE_PTYPE_L3_IPV4 (0x0010) IPv4 packet without extension headers
RTE_PTYPE_L4_UDP (0x0200) UDP packet
IP4: 00:02:c5:1b:51:07 -> 01:00:5e:00:00:01
UDP: 10.10.10.33 -> 232.0.0.1
tos 0x00, ttl 64, length 1428, checksum 0x392d
fragment id 0x0000, flags DONT_FRAGMENT
UDP: 1000 -> 5001
length 1408, checksum 0x0000
03:16:18:555289: ip4-input-no-checksum
UDP: 10.10.10.33 -> 232.0.0.1
tos 0x00, ttl 64, length 1428, checksum 0x392d
fragment id 0x0000, flags DONT_FRAGMENT
UDP: 1000 -> 5001
length 1408, checksum 0x0000
03:16:18:555296: ip4-mfib-forward-lookup
fib 0 entry 0
03:16:18:555297: ip4-mfib-forward-rpf
entry 0 -1
03:16:18:555297: ip4-drop
UDP: 10.10.10.33 -> 232.0.0.1
tos 0x00, ttl 64, length 1428, checksum 0x392d
fragment id 0x0000, flags DONT_FRAGMENT
UDP: 1000 -> 5001
length 1408, checksum 0x0000
03:16:18:555297: error-drop
ip4-input: ip4 adjacency drop
I get an error on the receive. (d612a0e0).
Anyone have any ideas what could be going wrong.
Thanks,
Guy
_______________________________________________
vpp-dev mailing list
[email protected]
https://lists.fd.io/mailman/listinfo/vpp-dev
