Hi guys,
I have the following configuration:
mpls tunnel add via 2.1.1.1 host-eth1 out-label 1024
set int state mpls-tunnel0 up
ip route add 192.168.3.0/24 via mpls-tunnel0 out-label 1023
Ping from CE to PE ,and the PE drop it.
That is the fib :
192.168.3.0/24
unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:34 buckets:1 uRPF:36 to:[15:1260]]
[0] [@11]: mpls-label:[3]:[1023:255:0:eos]
[@2]: mpls via 0.0.0.0 mpls-tunnel0:
stacked-on:
[@5]: dpo-load-balance: [proto:mpls index:35 buckets:1 uRPF:-1
to:[0:0] via:[15:1320]]
[0] [@8]: mpls-label:[1]:[1024:255:0:neos]
[@1]: mpls via 2.1.1.1 host-eth1: 00037ffffffe0e1a0d0050438847
The following is the trace info:
00:17:54:791606: af-packet-input
af_packet: hw_if_index 1 next-index 4
tpacket2_hdr:
status 0x1 len 98 snaplen 98 mac 66 net 80
sec 0x16645 nsec 0x34a33284 vlan 0
00:17:54:791899: ethernet-input
IP4: 2c:53:4a:02:91:95 -> 00:50:43:00:02:02
00:17:54:791956: ip4-input
ICMP: 192.168.2.10 -> 192.168.3.10
tos 0x00, ttl 64, length 84, checksum 0x0886
fragment id 0xabbe, flags DONT_FRAGMENT
ICMP echo_request checksum 0xae6a
00:17:54:792005: ip4-lookup
fib 1 dpo-idx 1 flow hash: 0x00000000
ICMP: 192.168.2.10 -> 192.168.3.10
tos 0x00, ttl 64, length 84, checksum 0x0886
fragment id 0xabbe, flags DONT_FRAGMENT
ICMP echo_request checksum 0xae6a
00:17:54:792062: ip4-drop
ICMP: 192.168.2.10 -> 192.168.3.10
tos 0x00, ttl 64, length 84, checksum 0x0886
fragment id 0xabbe, flags DONT_FRAGMENT
ICMP echo_request checksum 0xae6a
00:17:54:792110: error-drop
ip4-input: ip4 adjacency drop
How can I solve the problem?
Thanks,
xyxue
_______________________________________________
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
