Hi all,
I had found out a mistake, thanks.
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-07-15 14:36
To: vpp-dev
Subject: Re: [vpp-dev] tx_packet_error
Hi all,
If vpp is running on the vm, everything is ok. But on physical host system,
somethimes it can't work after a while, sometimes it takes a day. Func
"rte_eth_tx_burst" returns 1 when things go right, returns 0 when things go
wrong.
Anyone has met this before or has any clue?
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-07-15 10:21
To: vpp-dev
Subject: Re: tx_packet_error
Hi all,
With cmd "vppctl pcap tx trace on", I have caught tx packets, any guides?
Regards,
Ewan
yug...@telincn.com
From: yug...@telincn.com
Date: 2017-07-13 12:13
To: vpp-dev
Subject: tx_packet_error
Hi all,
After hours of running, vpp can rx packets, but can't tx packets.
Here is the result of cmd "vppctl show int".
Name Idx State
Count
GigabitEthernet0/19/0 1 up
rx packets 316
tx packets 12
tx-error 12
We have checked that VNET_SW_INTERFACE_FLAG_ADMIN_UP and
VNET_HW_INTERFACE_FLAG_LINK_UP are both setted.
Regards,
Ewan
yug...@telincn.com
_______________________________________________
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
