Resending this since it looks like it was never handled by the mail server... :(
On Wed, 2017-09-20 at 16:42 +0200, Marco Varlese wrote: > Hi, > > I am wondering if it's possible to have a VXLAN setup using a single host > environment. > > I thought to use two bridges; each bridge containing: > * a virutal interface to be connected to the VM; > * a vxlan tunnel interface; > * a loop device (with the IP configured as the vxlan tunnel termination) - > guess this might be the issue but do not know what else to be used :( > > Basically, I'd like to be able to send a ping from VM-1 to VM-2 (and vice- > versa) over a vxlan-tunnel. Unfortunately, I didn't succeed and any help would > be really appreciated. > > I am doing this since I'm working on a new tunnel protocol and having a setup > on a single host would be simpler for me to setup/maintain in my environment. > I chose VXLAN to try out (in this setup) an existing tunnel protocol first. > > Below the set of command I am using: > > ####################################################################### > # CREATE TAP interface for VM1 > $PATH/vppctl create vhost socket /tmp/sock1.sock server > $PATH/vppctl set interface state VirtualEthernet0/0/0 up > > # CREATE VXLAN-TUNNEL-0 > $PATH/vppctl create vxlan tunnel src 10.0.3.1 dst 10.0.3.3 vni 13 decap-next > l2 # creates vxlan_tunnel0 > > # CREATE LOOPBACK interface LOOP0 > $PATH/vppctl loopback create mac 1a:2b:3c:4d:5e:6f > $PATH/vppctl set interface state loop0 up > $PATH/vppctl set interface ip table loop0 5 > $PATH/vppctl set interface ip address loop0 10.0.3.1/24 > > ####################################################################### > # CREATE TAP interface for VM2 > $PATH/vppctl create vhost socket /tmp/sock2.sock server > $PATH/vppctl set interface state VirtualEthernet0/0/1 up > > # CREATE VXLAN-TUNNEL-1 > $PATH/vppctl create vxlan tunnel src 10.0.3.3 dst 10.0.3.1 vni 13 decap-next > l2 # creates vxlan_tunnel1 > > # CREATE LOOPBACK interface LOOP1 > $PATH/vppctl loopback create mac a1:b2:c3:d4:e5:f6 > $PATH/vppctl set interface state loop1 up > $PATH/vppctl set interface ip table loop1 5 > $PATH/vppctl set interface ip address loop1 10.0.3.3/24 > > ####################################################################### > # CREATE bridge-domain 1 with loop0 / vxlan_tunnel0 / tap0 > $PATH/vppctl create bridge-domain 1 learn 1 forward 1 uu-flood 1 flood 1 arp- > term 0 > $PATH/vppctl set interface l2 bridge VirtualEthernet0/0/0 1 > $PATH/vppctl set interface l2 bridge vxlan_tunnel0 1 > $PATH/vppctl set interface l2 bridge loop0 1 bvi > > # CREATE bridge-domain 2 with loop1 / vxlan_tunnel1 / tap1 > $PATH/vppctl create bridge-domain 2 learn 1 forward 1 uu-flood 1 flood 1 arp- > term 0 > $PATH/vppctl set interface l2 bridge VirtualEthernet0/0/1 2 > $PATH/vppctl set interface l2 bridge vxlan_tunnel1 2 > $PATH/vppctl set interface l2 bridge loop1 2 bvi > > $PATH/vppctl set bridge-domain arp term 1 > $PATH/vppctl set bridge-domain arp term 2 > > $PATH/vppctl set bridge-domain arp entry 1 10.0.3.1 1a:2b:3c:4d:5e:6f > $PATH/vppctl set bridge-domain arp entry 2 10.0.3.1 1a:2b:3c:4d:5e:6f > $PATH/vppctl set bridge-domain arp entry 2 10.0.3.2 a1:b2:c3:d4:e5:f6 > $PATH/vppctl set bridge-domain arp entry 1 10.0.3.2 a1:b2:c3:d4:e5:f6 > > > Some output I collected when trying to ping from one VM to another. > DBGvpp# show int > Name Idx State Counter Cou > nt > VirtualEthernet0/0/0 1 up rx > packets 34 > rx > bytes 5115 > drops > 34 > VirtualEthernet0/0/1 4 up rx > packets 50 > rx > bytes 5775 > drops > 50 > local0 0 down > loop0 3 up rx > packets 34 > rx > bytes 4639 > drops > 34 > ip4 > 9 > ip6 > 17 > loop1 6 up rx > packets 50 > rx > bytes 5075 > drops > 50 > ip4 > 9 > ip6 > 17 > vxlan_tunnel0 2 up tx > packets 34 > tx > bytes 6339 > vxlan_tunnel1 5 up tx > packets 50 > tx > bytes 7575 > DBGvpp# show node counters > Count Node Reason > 37 ip6-input ip6 adjacency drop > 115 ip4-input ip4 adjacency drop > 96 vxlan4-encap good packets encapsulated > 96 l2-output L2 output packets > 96 l2-learn L2 learn packets > 2 l2-learn L2 learn misses > 2 l2-learn L2 learn hit updates > 96 l2-input L2 input packets > 192 l2-flood L2 flood packets > 40 arp-input IP4 source address not local > to subnet > > > Thanks, > Marco > _______________________________________________ vpp-dev mailing list [email protected] https://lists.fd.io/mailman/listinfo/vpp-dev
