Hi,

17.10 has new CLI syntax after plugin was renamed 
https://wiki.fd.io/view/VPP/NAT#CLI

From your show command output I see same external address for both ICMP 
translations (172.56.0.2)

Regards,
Matus


-----Original Message-----
From: [email protected] [mailto:[email protected]] On 
Behalf Of Fabien THOMAS
Sent: Tuesday, October 3, 2017 10:30 AM
To: [email protected]
Subject: [vpp-dev] Invalid NAT addresses with 17.10rc

Hi,

I’ve the following configuration in 17.07 which work correctly:

eth1:
172.56.0.2

…
snap add static mapping local 172.56.0.2 external 172.56.0.2 snap add interface 
address host-eth1 set interface snat in gre0 out host-eth1 …

In 17.10rc (from today) ICMP seems broken as packets are translated with random 
addresses (TCP/UDP works):

ping 8.8.8.8 :

15.113.89.211(http://15.113.89.211/): 1 dynamic translations, 0 static 
translations i2o 15.113.89.211 proto icmp port 12851 fib 0 o2i 172.56.0.2 proto 
icmp port 32376 fib 0 external host 68.231.0.11 last heard 17.55 total pkts 2, 
total bytes 168 dynamic translation

15.114.89.211(http://15.114.89.211/): 1 dynamic translations, 0 static 
translations i2o 15.114.89.211 proto icmp port 12851 fib 0 o2i 172.56.0.2 proto 
icmp port 51383 fib 0 external host 68.232.0.11 last heard 18.55 total pkts 2, 
total bytes 168 dynamic translation

Is it a known issue ?

Fabien
_______________________________________________
vpp-dev mailing list
[email protected]
https://lists.fd.io/mailman/listinfo/vpp-dev
_______________________________________________
vpp-dev mailing list
[email protected]
https://lists.fd.io/mailman/listinfo/vpp-dev
  • [vpp-dev] Inva... Fabien THOMAS
    • Re: [vpp-... Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)

Reply via email to