I did a clean, switched to branch 18:01, and ran build command. It did move ahead but does not work on running.
When I run the following. I get: ON THE VPP SERVER: ------------------------- DBGvpp# 0: application_verify_cfg:245: memfd seg: vpp's event qs IN binary api svm region 0: vnet_application_attach: app init: -108 DBGvpp# show interface ON RUNNING THE TEST SERVER --------------------------------------- build-tool-native/ build-vpp_debug-native/ [root@vbbubng6-shashi-2 vpp]# ./build-root/build-vpp_debug-native/vpp/vcl_test_server 5678 vppcom_cfg_heapsize:1624: VCL<12013>: using default heapsize 268435456 (0x10000000) vppcom_cfg_heapsize:1770: VCL<12013>: allocated VCL heap = 0x7f33a8115000, size 268435456 (0x10000000) vppcom_cfg_read:1790: VCL<12013>: using default configuration. vppcom_connect_to_vpp:512: VCL<12013>: app (vcl_test_server) connecting to VPP api (/vpe-api)... vppcom_connect_to_vpp:528: VCL<12013>: app (vcl_test_server) is connected to VPP! vppcom_app_create:2284: VCL<12013>: sending session enable vppcom_app_create:2295: VCL<12013>: sending app attach vl_api_application_attach_reply_t_handler:817: VCL<12013>: attach failed: Unsupported application config (-108) ^C [root@vbbubng6-shashi-2 vpp]# This works fine for my old release but gives above error for 18:01 When I try to ping, the TEST CLIENT machine from VPP SERVER and vice versa. This also does not work now Regards Shashi From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Dave Barach Sent: 08 March 2018 18:21 To: vpp-dev@lists.fd.io Cc: vpp-dev@lists.fd.io Subject: Re: [vpp-dev] Error during startup +1. Please be careful. This is a cockpit error. From: vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> <vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io>> On Behalf Of Florin Coras Sent: Thursday, March 8, 2018 1:09 AM To: vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Cc: vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Subject: Re: [vpp-dev] Error during startup Hi Shashi, This can’t possibly be part of 17.10 and 18.01 since it was only merged this week on master. Probably you need to clean your repo, rebuild and reinstall debs. Florin On Mar 7, 2018, at 7:44 PM, Shashi Kant Singh <sksi...@altiostar.com<mailto:sksi...@altiostar.com>> wrote: Hi When I try to start vpp with release 17:10 and 18:01,. I am getting following TLS error What could be the issue? Regards Shashi PS: This worked fine for previous releases. # make run-release STARTUP_CONF=../startup.conf vlib_plugin_early_init:356: plugin path /bng5/shashi-2/vpp2/vpp/build-root/install-vpp-native/sample-plugin/lib64/vpp_plugins:/bng5/shashi-2/vpp2/vpp/build-root/install-vpp-native/vpp/lib64/vpp_plugins load_one_plugin:184: Loaded plugin: acl_plugin.so (Access Control Lists) load_one_plugin:184: Loaded plugin: dpdk_plugin.so (Data Plane Development Kit (DPDK)) load_one_plugin:184: Loaded plugin: flowprobe_plugin.so (Flow per Packet) load_one_plugin:184: Loaded plugin: gbp_plugin.so (Group Based Policy) load_one_plugin:184: Loaded plugin: gtpu_plugin.so (GTPv1-U) load_one_plugin:184: Loaded plugin: ila_plugin.so (Identifier-locator addressing for IPv6) load_one_plugin:184: Loaded plugin: ioam_plugin.so (Inbound OAM) load_one_plugin:114: Plugin disabled (default): ixge_plugin.so load_one_plugin:184: Loaded plugin: kubeproxy_plugin.so (kube-proxy data plane) load_one_plugin:184: Loaded plugin: l2e_plugin.so (L2 Emulation) load_one_plugin:184: Loaded plugin: lb_plugin.so (Load Balancer) load_one_plugin:184: Loaded plugin: libsixrd_plugin.so (IPv6 Rapid Deployment on IPv4 Infrastructure (RFC5969)) load_one_plugin:184: Loaded plugin: memif_plugin.so (Packet Memory Interface (experimetal)) load_one_plugin:184: Loaded plugin: nat_plugin.so (Network Address Translation) load_one_plugin:184: Loaded plugin: pppoe_plugin.so (PPPoE) load_one_plugin:184: Loaded plugin: sample_plugin.so (Sample of VPP Plugin) load_one_plugin:184: Loaded plugin: srv6ad_plugin.so (Dynamic SRv6 proxy) load_one_plugin:184: Loaded plugin: srv6am_plugin.so (Masquerading SRv6 proxy) load_one_plugin:184: Loaded plugin: srv6as_plugin.so (Static SRv6 proxy) load_one_plugin:184: Loaded plugin: stn_plugin.so (VPP Steals the NIC for Container integration) tls_init_ca_chain:1125: Could not initialize TLS CA certificates tls_init:1168: failed to initialize TLS CA chain tls_init: failed to initalize TLS CA chain
