My current VLAN config: loopback create set int l2 bridge loop1 2 bvi set int ip address loop1 192.168.2.1/24 set int state loop1 up
create sub GigabitEthernet0/14/0 2 set int l2 bridge GigabitEthernet0/14/0.2 2 set int l2 tag-rewrite GigabitEthernet0/14/0.2 pop 1 set int state GigabitEthernet0/14/0.2 up loopback create set int l2 bridge loop2 3 bvi set int ip address loop2 192.168.3.1/24 set int state loop2 up create sub GigabitEthernet0/14/0 3 set int l2 bridge GigabitEthernet0/14/0.3 3 set int l2 tag-rewrite GigabitEthernet0/14/0.3 pop 1 set int state GigabitEthernet0/14/0.3 up So this should route traffic between VLAN 2 and VLAN 3, correct? Thanks On Thu, Apr 19, 2018 at 12:52 PM, Andrew Yourtchenko <ayour...@gmail.com> wrote: > > hi Carlito, > > you can configure subinterfaces with tags and assign the ip addresses so the > VPP does routing and then either use vnet ACLs or acl plugin to restrict the > traffic. > > —a > > On 19 Apr 2018, at 21:07, Dave Barach <dbar...@cisco.com> wrote: > > Begin forwarded message: > > From: Carlito Nueno <carlitonu...@gmail.com> > Date: April 19, 2018 at 9:03:51 AM HST > To: dbar...@cisco.com > Subject: VLAN to VLAN > > Hi Dave, > > How can I enable VLAN to VLAN communication? I want to have devices on > one VLAN talk to devices on another VLAN, if possible constrain the > devices by MAC or IP address. > > For example, only device with MAC (aa:aa:bb:80:90) or IP address > (192.168.2.20) on VLAN 100 can talk to devices on VLAN 200 > (192.168.3.0/24). > > Thanks > > -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#9000): https://lists.fd.io/g/vpp-dev/message/9000 View All Messages In Topic (3): https://lists.fd.io/g/vpp-dev/topic/17639114 Mute This Topic: https://lists.fd.io/mt/17639114/21656 New Topic: https://lists.fd.io/g/vpp-dev/post Change Your Subscription: https://lists.fd.io/g/vpp-dev/editsub/21656 Group Home: https://lists.fd.io/g/vpp-dev Contact Group Owner: vpp-dev+ow...@lists.fd.io Terms of Service: https://lists.fd.io/static/tos Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub -=-=-=-=-=-=-=-=-=-=-=-
