Hi Luca, I guess, as you did, that it’s vectorization. VPP is really good at pushing packets whereas Linux is good at using all hw optimizations.
The stack uses it’s own shared memory mechanisms (check svm_fifo_t) but given that you did the testing with iperf3, I suspect the edge is not there. That is, I guess they’re not abusing syscalls with lots of small writes. Moreover, the fifos are not zero-copy, apps do have to write to the fifo and vpp has to packetize that data. Florin > On May 7, 2018, at 10:29 AM, Luca Muscariello (lumuscar) <lumus...@cisco.com> > wrote: > > Hi Florin > > Thanks for the info. > > So, how do you explain VPP TCP stack beats Linux > implementation by doubling the goodput? > Does it come from vectorization? > Any special memif optimization underneath? > > Luca > > On 7 May 2018, at 18:17, Florin Coras <fcoras.li...@gmail.com > <mailto:fcoras.li...@gmail.com>> wrote: > >> Hi Luca, >> >> We don’t yet support TSO because it requires support within all of vpp >> (think tunnels). Still, it’s on our list. >> >> As for crypto offload, we do have support for IPSec offload with QAT cards >> and we’re now working with Ping and Ray from Intel on accelerating the TLS >> OpenSSL engine also with QAT cards. >> >> Regards, >> Florin >> >>> On May 7, 2018, at 7:53 AM, Luca Muscariello <lumuscar+f...@cisco.com >>> <mailto:lumuscar+f...@cisco.com>> wrote: >>> >>> Hi, >>> >>> A few questions about the TCP stack and HW offloading. >>> Below is the experiment under test. >>> >>> +------------+ +-----------+ >>> | +-----+ DPDK-10GE| | >>> |Iperf3| TCP | +------------+ |TCP Iperf3 >>> | +------------+Nexus Switch+------+ + >>> |LXC | VPP|| +------------+ |VPP |LXC | >>> +------------+ DPDK-10GE +-----------+ >>> >>> >>> Using the Linux kernel w/ or w/o TSO I get an iperf3 goodput of 9.5Gbps or >>> 4.5Gbps. >>> Using VPP TCP stack I get 9.2Gbps, say max goodput as Linux w/ TSO. >>> >>> Is there any TSO implementation already in VPP one can take advantage of? >>> >>> Side question. Is there any crypto offloading service available in VPP? >>> Essentially for the computation of RSA-1024/2048, EDCSA 192/256 signatures. >>> >>> Thanks >>> Luca >>> >>> >>
