https://wiki.fd.io/view/VPP/Command-line_Interface_(CLI)_Guide#set_interface
vpp# set interface l2 bridge TenGigabitEthernet0/8/0 100
vpp# set interface l2 bridge TenGigabitEthernet0/9/0 100
vpp# set interface state TenGigabitEthernet0/8/0 up
vpp# set interface state TenGigabitEthernet0/9/0 up
vpp# show int
vpp# show bridge 100 det

> On Oct 16, 2018, at 9:41 PM, [email protected] wrote:
> 
> [Edited Message Follows]
> 
> Working with VPP for the first time and looking for some advice with initial 
> setup.
> 
> Looking to have VPP act like a passive device that simply forwards all of the 
> packets through it from NICA > NICB. Currently it will only forward packets 
> for IPs in the same subnets configured in the NICs (and drop the rest), what 
> would be the proper configuration to make sure all packets are forwarded, 
> regardless of the source or destination IP?
> 
> Thanks.
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> 
> View/Reply Online (#10845): https://lists.fd.io/g/vpp-dev/message/10845
> Mute This Topic: https://lists.fd.io/mt/27376460/675164
> Group Owner: [email protected]
> Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [[email protected]]
> -=-=-=-=-=-=-=-=-=-=-=-
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#10846): https://lists.fd.io/g/vpp-dev/message/10846
Mute This Topic: https://lists.fd.io/mt/27376460/21656
Group Owner: [email protected]
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to