Start traffic. “clear run”.
Wait several seconds. “show run”. Add up clocks/pkt/node for data-plane nodes to form total clocks/pkt. Results valid only for the prevailing vector rate, CPU type, CPU clock frequency, etc.. Vpp nodes run dramatically more efficiently as the vector size increases, up to the point where rx ring drops occur. HTH... Dave From: vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> On Behalf Of Merve Sent: Thursday, November 12, 2020 6:30 AM To: vpp-dev@lists.fd.io Subject: [vpp-dev] Total Packet Process Time in VPP Hi everyone, I'm using VPP with trex. I send and receive packets. Is there any place on Vpp where I can view the total processing time? I see graph runtime statistic but I haven't found anything about the time passed here. I see like this; İn here "time" is not total processing time. (show runtime command) Time 1603.9, 10 sec internal node vector rate 0.00 loops/sec 1367859.23 vector rates in 1.5238e5, out 1.5159e5, drop 0.0000e0, punt 0.0000e0
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#18005): https://lists.fd.io/g/vpp-dev/message/18005 Mute This Topic: https://lists.fd.io/mt/78204265/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-