Hi friends , I have a problem with ARP delivery to the BVI interface on a BD. I see in trace that the ARP packet after l2 flooding goes to the Non-BVI output interface , but this doesn't happen for a loopback/BVI interface. thus I can't ping 100.3.4.4 from 100.3.4.11.
create bridge-domain 2 set int l2 bridge GigabitEthernet2/6/0 2 set int state GigabitEthernet2/6/0 up create loopback interface set int l2 bridge loop0 2 bvi set int state loop0 up set int ip address loop0 100.3.4.12 / 3.3.3.3/24 Should I configure a route for loop0/BVI or use set ip arp command? I also use ip route table 0 100.3.4.0/24 via loop0 but the problem remains.I use vpp 18.10.
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#19927): https://lists.fd.io/g/vpp-dev/message/19927 Mute This Topic: https://lists.fd.io/mt/84763705/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
