[Sorry accidentally sent this half way through writing it.] Hi Tyrone,
Unfortunately the documentation is still under development so you'll have to do a bit of work to understand how things function. That said, there is some documentation already, could you start from there and let us know what you need explained more? Then perhaps we can fill in the details for others too. If you're not willing to get your hands dirty you might want to go with Virtuozzo - the vserver project is not nicely polished like it might be. But that's better, because you'll actually learn how everything works, and so be able to fix it when it breaks! [Firstly: yes vservers work on RH9. You won't be able to use FreeVPS though, you'll have to use the standard vserver patches and tools that are available from linux-vserver.org. This means you can't use a Red Hat modified kernel but that shouldn't be a problem (I'm running my vservers on RH9 with a vanilla kernel at the moment).] The Step-by-Step Guide[1] outlines the general steps required: building a kernel, installing the vserver tools, then setting up your vserver. Unfortunately the details aren't there, so you might have trouble if you're not used to compiling your own kernel etc. The FAQ[2] contains lots of useful hints. For example it explains that you need to enable the CAP_SYS_RESOURCE capability for vservers that run BIND (that or recompile your BIND with --disable-linux-caps.) Also Jacques' paper on vserver[3] is awesome, it's worth a read through. 1. http://www.linux-vserver.org/index.php?page=Step-by-Step+Guide 2. http://www.linux-vserver.org/index.php?page=Linux-Vserver+FAQ 3. http://www.solucorp.qc.ca/miscprj/s_context.hc?prjstate=1&nodoc=0 Hope this helps. Let us know any problems you have. Cheers, Chuck > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Sunday, 23 November 2003 4:52 PM > To: [EMAIL PROTECTED] > Subject: Re: [Vserver] Rpms for vserver 0.27 (got it) > > > Can I set the vservers up on rh9, or will they only work on > rh7.3? I want to run plesk6 in a vserver, and run into > problems with bind (capset failed), I currently tried this > with Freevps on RH7.3. What will be the best way to go, > without purchasing something like virtuozzo. There's a site > called (jvds.com) with environment already built, but I dont > understand how to setup and manage them, if you have any > place information on where I can gain some knowledge please > respond. Thanks TyroneM, > > > > From: Jacques Gelinas <[EMAIL PROTECTED]> > > Date: 2003/11/22 Sat PM 10:16:21 EST > > To: Vserver mailing list <[EMAIL PROTECTED]> > > Subject: [Vserver] Rpms for vserver 0.27 (got it) > > > > > _______________________________________________ Vserver mailing list [EMAIL PROTECTED] http://list.linux-vserver.org/mailman/listinfo/vserver