For those of you who read my previous inquiry I've
decided to go with 0.26 instead of 0.27 or 0.29.
So far I've downloaded vserver-0.26.src.tar.gz to my
Debian(woody) box and I have a partition (/vservers)
where I will be running my vservers. I have
accomplished this feit before but lost my HDD and all
the instructions I had on the setup/install.
Previously I used the install-pre.sh, -post.sh and
-fix.sh files but cannot remember how I got it work. I
have tried to install this setup but end up screwing
my initial console and sending my box into a never
ending rebooting sequence where I am unable to recover
it and have to start over from the debian
installation. I am trying to show my bosses (who are
dead against using Open Source solutions) the benifits
of using Linux and other Open Source products to
accomplish what they think only Microsoft can do. All
I ask is that someone send me some instructions on
howto setup using the install-***.sh files or even a
link that will point me to a helpful site.
.. Thanks .. Jae
i run the current devel series (2.4.24-ck1-xfs-vs1.3.4). but i use enrico's tool (util-vserver-0.27.tar.bz2) so i cannot help you in this situation.
i too suggest, that you visit the irc channel and maybe write a short howto as you progress and succeed. that would be a great help for others, struggeling with the same problem!
best regards, raoul bhatia -- ____________________________________________________________________ raoul bhatia email. [EMAIL PROTECTED] cto - chief technology officer web. http://www.ipax.tk ipax.tk irc. #ipax (quakenet) ____________________________________________________________________ _______________________________________________ Vserver mailing list [EMAIL PROTECTED] http://list.linux-vserver.org/mailman/listinfo/vserver
