Hi all, I just installed (that means 14 days ago) linux-vserver and run ~12 vservers on one physical box running different services inside every vserver (mail server, web server, etc.). It works great! The iptables firewall (via firehol) is filtering all the traffic for the vservers.
I wanted to have a DMZ and installed an additional network card to bind all these vservers to. But then I discovered the dummy device and want to change eth1 against dummy0 (after installing the dummy module ;-) and remove the additional network card from the server if it can be done. But first I want to know, if this is common =good) practice. Or should I rather tinker with bridge and tun devices? The mailing list shows many things possible (vlan, bridge, dummy), but I can't see, what the best practices are. If I can gather all th information needed, the I am willing to write some doku in the wiki at linux-vserver.org :-) Thanks for your advice. Greetings Dirk _______________________________________________ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver
