[vserver] Can't set the ipv4 root (Bad address)

[Thomas Braselmann]

Hello List,   i had trouble to patch the original 2.4.20 Kernel from Slackware 9.1 so i have installed the original kernel from kernel org. patch it with ctx 17 the patch was okay   [EMAIL PROTECTED]:~# uname -a Linux obelix 2.4.20 #17 Mon Mar 17 22:45:18 PST 2003 i686 unknown [EMAIL PROTECTED]:~#   i setup up a minimal /etc/vservers/01.conf   look like this   IPROOT="192.168.0.100" S_HOSTNAME="obelix2" ONBOOT="yes" S_DOMAINNAME="none" #S_NICE= S_FLAGS="lock nproc" ULIMIT="-H -u 5"   after compiling kernel an setup vserver software   vserver-0.22.src.tar.gz vserver-admin-0.22-1.i386.tgz <- rpm2tgz under slack from vserver-admin-0.22-1.i386.rpm file linuxconf-1.30r3.bin-elf.tgz   i have following failure after start the server   [EMAIL PROTECTED]:~# vserver 01 start Starting the virtual server 01   ********************************************************** /vservers/01/.. has insecure permissions. A vserver administrator may be able to visit the root server. To fix this, do          chmod 000 /vservers/01/.. do it anytime you want, even if vservers are running. **********************************************************   Server 01 is not running Can't set the ipv4 root (Bad address)     in the mailing list archiv i found only something about wrong patches or failed patches with this failure     about the permisson problem ...     /vservers is a ext2 partiton with defaults   /dev/sda13       /vservers        ext2        defaults         1   2   drwxr-xr-x    4 root     root         4096 Apr  3 21:34 vservers/   please anyone know about what it could be else ? all kind of help are welcome   kind regards Thomas