On Wed, 10 Sep 1997, Fabien COUTANT wrote:
> Rick Macdonald wrote:
> | This isn't vTcl specific. I was going to post this to the tcl newsgroup
> | but it's a bit long and I feared getting flambee'd for it.
> | I'm hoping somebody could try this out on Tcl/Tk version 8 and let me
> | know if it has the same behaviour. Just fire it up and read the
> | instructions and comments.
> I tried it with Tk 8.0 on AIX 3.2.5, compiled with native (IBM) C compiler.
> I can't see any double increment symptom, even with the amount of work
> raised up to 2000. However at this level I can easily notice an autorepeat
> effect if I click longer than a simple and usual click, but I suspect this
> is absolutely normal.
I heard from a v8 user on a Sparc 4 who got the double increment at almost
1900. My UltraSparc was only 900. The difference must be due to the
internal compiler in v8.
Depending on your hardware, you probably have to bump up the first scale
from 2000 to something much larger, say 10000 with tickinterval 1000, for
example, in the following line of code:
scale .top17.fra18.sca22 \
-orient horiz -tickinterval 100.0 -to 1000.0 -variable num_loops \
It would help me to know what h/w you have and how high you had to set the
value. I plan to report this in case somebody thinks it can/should be
fixed.
...RickM...
