Hi John, The bridged ethernet interfaces should not have an IP address assigned to them. You can then assign an IP address to the br0 interface outside of XORP using ifconfig.
I will enter a bug into bugzilla to get IP layer config added to the bridge interface type... Cheers, Robert. John Mason Jr wrote: > I looked for a FAQ covering bridging but was unable to find one. > > I am looking to use vyatta as a filtering bridge between a host on the > network and the rest of the network only allowing required traffic to pass > > Currently hardware includes 2 Ethernet adapters eth0 & eth1 > > In my first attempt I > > set the host name > set domain name > set static host mapping to host-name > set ip address on eth0 > enabled web and ssh > > I was able to login to web interface, and created br0 > > As soon as I added eth0 & eth1 to bridge group vyatta was no longer > accessible via the network. > > > Do I need to add a third interface to manage the bridge? > > > Can someone point me in the right direction, I'd be happy to RTFM if I > could find the relevant docs > > > John > > > > > > > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users