Paco, I'll add an example like this into the Configuration Guide. Thanks, Justin!
Lindsay _________________________________ Lindsay Burrell Technical Writer Vyatta, Inc. [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Justin Fletcher Sent: September 10, 2007 5:02 PM To: Paco Alcantara Cc: Vyatta Users Subject: Re: [Vyatta-users] DHCP static-mapping... Here's one example I just set up: shared-network-name lab { subnet 10.1.0.0/24 { start 10.1.0.171 { stop: 10.1.0.175 } static-mapping abcd { ip-address: 10.1.0.175 mac-address: 00:15:c5:b3:2e:65 } Best, Justin On 9/10/07, Paco Alcantara <[EMAIL PROTECTED]> wrote: > > I have found no info about how to configure static mapping in DHCP server. > > Could you, please, give me an example... > > set service dhcp-server shared-network-name ETH1_POOL subnet > 192.168.1.0/24 static-mapping <but how to statically map ip add with > mac add?> > > regards. > Paco > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
