Hi, I updated Vyatta, and it's looking better now : all vrrp processes start. (I didn't test vvrp by now).
You can consider this incident as closed Thanks for your help -----Message d'origine----- De : Dominique Jeannerod [mailto:[EMAIL PROTECTED] Envoyé : vendredi 28 septembre 2007 20:16 À : 'Michael Larson'; 'Stig Thormodsrud' Cc : 'vyatta-users@mailman.vyatta.com' Objet : RE: [Vyatta-users] VRRP Problems Hi, I'm running this version: [EMAIL PROTECTED]> show version Version: VC2 Built by: [EMAIL PROTECTED] Built on: 200702080056 -- Thu Feb 8 00:56:19 UTC 2007 I already tried to start manually the vrrp process, and nothing special happens : the process starts silently, with no message at all, and I see the new ip address with "ip addr" or "show vrrp" in xorpsh Yes it looks like the same bug, and i'm running a version before the fix. I will try to upgrade and test again Thanks for your answer -----Message d'origine----- De : Michael Larson [mailto:[EMAIL PROTECTED] Envoyé : vendredi 28 septembre 2007 18:14 À : Stig Thormodsrud Cc : 'Dominique Jeannerod'; vyatta-users@mailman.vyatta.com Objet : Re: [Vyatta-users] VRRP Problems This sounds very similar to this bug that was fixed in April: https://bugzilla.vyatta.com/show_bug.cgi?id=1844 Dominique--which version of the OFR are you using? Mike Stig Thormodsrud wrote: > Hi Dominique, > > > > I dont see anything wrong with your config, so its puzzling that the > other processes arent getting started. You might be running into bug > 2325 (https://bugzilla.vyatta.com/show_bug.cgi?id=2325) , but then you > probably would have additional error messages in your log. I might be > interesting to try to manually start the process from the linux shell > to see if it gives any error messages. Try (/opt/vyatta/sbin/vrrpd -i > eth6.102 -v 102 -p 150 -d 1 10.2.102.1) > > > > stig > > > > > > ---------------------------------------------------------------------- > -- > > *From:* [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] *On Behalf Of > *Dominique Jeannerod > *Sent:* Thursday, September 27, 2007 6:02 AM > *To:* vyatta-users@mailman.vyatta.com > *Subject:* [Vyatta-users] VRRP Problems > > > > Hello, > > i'm trying to configure a Vyatta OFR on a Xen virtual machine, > configured with 10 ethernet interfaces, some of them tagged. > > When I configure VRRP on one of them (only one), everything is ok : > > - I see the vrrp process, > > - I can ping the VRRP IP > > - "show vrrp" output shows the VVRP interface, and "ip addr" on linux > shows also the right IP addresses. > > > > This works ok for standard eth interfaces and also for tagged ones. > > > > Here is the conf of some of them : > > ethernet eth1 { > hw-id: 00:16:3E:2A:22:13 > address 10.1.1.252 { > prefix-length: 24 > } > vrrp { > virtual-address: 10.1.1.251 > priority: 150 > } > > ethernet eth5 { > hw-id: 00:16:3E:4A:FD:4B > vif 101 { > address 10.2.101.2 { > prefix-length: 24 > } > vrrp { > vrrp-group: 101 > virtual-address: 10.2.101.1 > priority: 150 > } > } > > But when I'm trying to configure several ones (eth1, eth5, eth6, eth7) > with VRRP, VRRP starts only on 2 of them, even after reboot, and it > looks like the vrrp process is not started. One example : > > > > _Vyatta Conf_ > > [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> show configuration > protocols { > static { > route 0.0.0.0/0 { > next-hop: xxx.xxx.xxx.xxx > } > } > } > policy { > } > interfaces { > loopback lo { > } > ethernet eth0 { > hw-id: 00:16:3E:5C:AE:13 > address 193.33.79.10 { > prefix-length: 24 > } > } > ethernet eth1 { > hw-id: 00:16:3E:2A:22:13 > address 10.1.1.252 { > prefix-length: 24 > } > vrrp { > virtual-address: 10.1.1.251 > priority: 150 > } > } > ethernet eth2 { > hw-id: 00:16:3E:10:7A:CD > } > ethernet eth3 { > hw-id: 00:16:3E:0E:F6:9B > } > ethernet eth4 { > hw-id: 00:16:3E:4F:69:1E > } > ethernet eth5 { > hw-id: 00:16:3E:4A:FD:4B > vif 101 { > address 10.2.101.2 { > prefix-length: 24 > } > vrrp { > vrrp-group: 101 > virtual-address: 10.2.101.1 > priority: 150 > } > } > } > ethernet eth6 { > hw-id: 00:16:3E:65:DE:08 > vif 102 { > address 10.2.102.2 { > prefix-length: 24 > } > vrrp { > vrrp-group: 102 > virtual-address: 10.2.102.1 > priority: 150 > } > } > } > ethernet eth7 { > hw-id: 00:16:3E:71:4C:10 > vif 103 { > address 10.2.103.2 { > prefix-length: 24 > } > vrrp { > vrrp-group: 103 > virtual-address: 10.2.103.1 > priority: 150 > } > } > } > firewall { > } > service { > http { > } > ssh { > } > } > system { > host-name: "sv-inf-tst-fw-01" > domain-name: "hostics.fr" > name-server 10.1.1.202 > name-server 10.1.1.201 > ntp-server "10.1.1.202" > ntp-server "10.1.1.201" > login { > user root { > authentication { > encrypted-password: "$1$$Ht7gBYnxI1xCdO/JOnodh." > } > } > user vyatta { > authentication { > encrypted-password: "$1$$Ht7gBYnxI1xCdO/JOnodh." > } > } > } > package { > repository community { > component: "main" > url: "http://archive.vyatta.com/vyatta"; > } > } > } > rtrmgr { > config-directory: "/opt/vyatta/etc/config" > } > > _ps -ef | grep vrrp output :_ > > root 2585 1 0 12:03 ? 00:00:00 /opt/vyatta/sbin/vrrpd > -i eth1 -v 1 -p 150 -d 1 10.1.1.251 > root 2590 1 0 12:03 ? 00:00:00 /opt/vyatta/sbin/vrrpd > -i eth5.101 -v 101 -p 150 -d 1 10.2.101.1 > > _show vrrp output_ > > Physical interface: eth1, Address: 10.1.1.251 > Interface state: up, Group: 1, State: master > Priority: 150, Advertisement interval: 1s, Authentication type: none > Preempt: yes, VIP count: 1, VIP: 10.1.1.251 > Advertisement timer: 1575s, Master router: 10.1.1.252 > Virtual MAC: 00:00:5E:00:01:01 > > > > Physical interface: eth5.101, Address: 10.2.101.1 > Interface state: up, Group: 101, State: master > Priority: 150, Advertisement interval: 1s, Authentication type: none > Preempt: yes, VIP count: 1, VIP: 10.2.101.1 > Advertisement timer: 1575s, Master router: 10.2.101.2 > Virtual MAC: 00:00:5E:00:01:65 > > _vrrpd log in /var/log/messages_ > > Sep 27 12:03:10 vyatta vrrpd: vrrpd version 0.4 starting... > Sep 27 12:03:10 vyatta vrrpd: VRRP ID 1 on eth1: we are now a backup router. > Sep 27 12:03:10 vyatta vrrpd: vrrpd version 0.4 starting... > Sep 27 12:03:10 vyatta vrrpd: VRRP ID 101 on eth5.101: we are now a > backup router. > Sep 27 12:03:14 vyatta vrrpd: [ 2007/09/27 12:03:14 WARNING vrrpd > LIBXORP ] 4 seconds between calls to EventLoop::run Sep 27 12:03:14 > vyatta vrrpd: [ 2007/09/27 12:03:14 WARNING vrrpd LIBXORP ] 4 seconds > between calls to EventLoop::run Sep 27 12:03:14 vyatta vrrpd: VRRP ID > 1 on eth1: we are now the master router. > Sep 27 12:03:14 vyatta vrrpd: VRRP ID 101 on eth5.101: we are now the > master router. > > > > _Questions :_ > > - is my conf right (I read that vyatta allows only 1 VRRP IP per > physical interface, what I did) ? > > - do i need a different vrrp-group on each interface (Newbie question !) ? > > - can someone help me resolve this problem, as it looks like some > parts of the conf is ignored ? > > > > Thanks a lot ! > > > > > ---------------------------------------------------------------------- > -- > > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
