Hello,
I have installed OpenVPN on Vyatta successfully to test OSPF status with a Linux/Quagga router. I would like to use it with Vyatta in a (magic) triangle scenario. The thing is, OpenVPN creates a Virtual interface called "tap" or "tun". Under quagga i just successfully added the network 10.7.0.2/30 (the tunnel network) in OSPF but under Vyatta you need to use an interface (set protocol ospf4 area 0.0.0.0 interface ...) and of course i have no tun or tap interface available at the VYatta level, so i tried to use the ethernet interface and put 10.7.0.1/30 as a secondary interface. The result is the following, the Quagga sees correcty the Vyatta router as OSPF neighbour but not the contrary. I think this is because i had to declare the network tunnel (10.7.0.0/30) under the eth0 interface. The best thing would be that it wouldn't be mandatory to add an interface in the Vyatta OSPF statement. :-) Can you help me? Has anyone connected two Vyatta together with OSPF and OpenVPN? Thanks Troopy ______________________________________________________ Désirez vous une adresse éléctronique @suisse.com? Visitez la Suisse virtuelle sur http://www.suisse.com _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users