Two things.
1) Your DHCP config should be handing out the inside ip of the vyatta
box for the default-gateway to clients, in this case 10.0.0.1, not
the default gateway of the vyatta box itself.
2) You need to give the vyatta box a name server so it can resolve
addresses to get to the apt repository for updates. Do this:
set system name-server 192.168.0.2
commit
save
And that will allow the vyatta router to look up host names to get on
the internet.
------------------
Aubrey Wells
Senior Engineer
Shelton | Johns Technology Group
404.478.2790
www.sheltonjohns.com
On Nov 16, 2007, at 9:40 AM, GVerris wrote:
Hi my name is Giannis and I am a new user of vyatta and I have some
problems
I use the vc3
This is my network
PC1 (IP A)
PC2 (IP B)
PC3 (IP C)
SERVER (IP D)
ROUTER (NOT VYATTA) (IP E)
(DNS & DHCP is disabled I want to used it as gateway only)
And the role of firewall, dhcp, dns, router etc I want to be the
vyatta
Here is my config.boot
/*XORP Configuration File, v1.0*/
protocols {
static {
disable: false
route 0.0.0.0/0 {
next-hop: 192.168.0.1
metric: 1
}
}
}
policy {
}
interfaces {
restore: false
loopback lo {
description: ""
}
ethernet eth0 {
disable: false
discard: false
description: "Office Lan"
hw-id: 00:50:bf:6b:0d:ce
duplex: "auto"
speed: "auto"
address 10.0.0.1 {
prefix-length: 24
disable: false
}
}
ethernet eth1 {
disable: false
discard: false
description: "Internet Wan"
hw-id: 00:50:22:82:ef:63
duplex: "auto"
speed: "auto"
address 192.168.0.2 {
prefix-length: 24
disable: false
}
firewall {
local {
name: "FWTELNET"
}
}
}
}
service {
dhcp-server {
shared-network-name OfficeLAN {
subnet 10.0.0.0/24 {
start 10.0.0.50 {
stop: 10.0.0.150
}
dns-server 192.168.0.20
default-router: 192.168.0.2
lease: 86400
domain-name: "test.router"
authoritative: "disable"
}
}
}
nat {
rule 1 {
type: "masquerade"
outbound-interface: "eth1"
protocols: "all"
source {
network: "10.0.0.0/24"
}
destination {
network: "0.0.0.0/0"
}
}
rule 2 {
type: "destination"
inbound-interface: "eth1"
protocols: "tcp"
source {
network: "0.0.0.0/0"
}
destination {
address: "192.168.0.1"
port-name http
}
inside-address {
address: 10.0.0.30
}
}
}
telnet {
port: 23
}
webgui {
http-port: 80
https-port: 443
}
}
firewall {
log-martians: "enable"
send-redirects: "disable"
receive-redirects: "disable"
ip-src-route: "disable"
broadcast-ping: "disable"
syn-cookies: "enable"
name FWTELNET {
rule 1 {
protocol: "tcp"
action: "reject"
log: "disable"
source {
network: "0.0.0.0/0"
}
destination {
port-name telnet
}
}
rule 2 {
protocol: "all"
action: "accept"
log: "disable"
source {
network: "0.0.0.0/0"
}
destination {
network: "0.0.0.0/0"
}
}
}
}
system {
host-name: "vyatta"
domain-name: ""
time-zone: "GMT"
ntp-server "69.59.150.135"
login {
user root {
full-name: ""
authentication {
encrypted-password: "xxxxxxxxxxxxxxxxxxxxx"
}
}
user vyatta {
full-name: ""
authentication {
encrypted-password: "xxxxxxxxxxxxxxxxxxxxx"
}
}
}
package {
auto-sync: 1
repository community {
component: "main"
url: "http://archive.vyatta.com/vyatta";
}
}
}
/* Warning: Do not remove the following line. */
/* === vyatta-config-version: "[EMAIL PROTECTED]:[EMAIL PROTECTED]:dhcp-
[EMAIL PROTECTED]:[EMAIL PROTECTED]:[EMAIL PROTECTED]:[EMAIL PROTECTED]:[EMAIL PROTECTED]" === */
Here is the problems
1. I can’t see the internet the dhcp works fine and the
firewall,dns I suppose.
2. The vyatta does not connect to the internet to make updates
Please help I don’t know what is wrong
thanks
_______________________________________________
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users
_______________________________________________
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users
