Did you remove the HW-ID entries from the config file before moving it to the new machine(s)?
------------------ Aubrey Wells Senior Engineer Shelton | Johns Technology Group A Vyatta Ready Partner www.sheltonjohns.com On Nov 26, 2007, at 1:47 PM, Thomas wrote: > Greetings, > > I'm sorry if this has been addressed in the Config > Guide just in case I missed it. We have built out a > Vyatta router that we are finally satisfied with. We > would like the generic portions of this configuration > to become the base configuration for other routers > that we will deploy. > > I know that when Vyatta boots it has some approximate > functionality to "migrate" configurations (tell me if > I'm on the wrong track here...) but is there a way for > me to deploy the same config.boot to other Vyatta > routers so that they come more or less pre-installed > with only some minor changes that need to be made to > the interfaces and some configured IP addresses? > > I tried this by just copying the config.boot, but when > I did so the router appeared to lock up in the > following bootup. No good. I figured there must be a > procedure in place to accomplish the same task... > > -Thomas > > > > ____________________________________________________________________________________ > Get easy, one-click access to your favorites. > Make Yahoo! your homepage. > http://www.yahoo.com/r/hs > > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
