You can enable verbose debugging by changing VERBOSERTRMGR=
on line 51 of /opt/vyatta/sbin/rtrmgr.init to VERBOSERTRMGR=-v As a caution, this will generate a LOT of output in your log files!! Justin On Jan 17, 2008 1:31 PM, Shane McKinley <[EMAIL PROTECTED]> wrote: > I did. I am trying to comment out my static routes to see if that will > help. > > Any other suggestions? > > > Shane McKinley > Habersham EMC > > -----Original Message----- > > From: Michael Larson [mailto:[EMAIL PROTECTED] > Sent: Thursday, January 17, 2008 4:27 PM > To: Shane McKinley > Cc: vyatta-users@mailman.vyatta.com > Subject: Re: [Vyatta-users] Waiting for xorp_rtrmgr... > > Hi Shane, > > Did you restart the syslog daemon after you modified the syslog.conf > file? > > /etc/init.d/sysklogd restart > > Mike > > ----- Original Message ----- > From: "Shane McKinley" <[EMAIL PROTECTED]> > To: vyatta-users@mailman.vyatta.com > Sent: Thursday, January 17, 2008 1:23:06 PM (GMT-0800) > America/Los_Angeles > Subject: Re: [Vyatta-users] Waiting for xorp_rtrmgr... > > I have changed /etc/syslog.conf to *.* and restarted the vyatta-ofr. I > don't see anything that just pops out at me in /var/log/messages since > the restart. I did truncate the file before attempting to restart the > vyatta-ofr service. > > Any way to pinpoint which line in my config is causing the issue? > > (SIDE NOTE: (No offense meant) Why should changing interface notations > and static routes cause anything to crash?) > > Shane McKinley > Habersham EMC > > -----Original Message----- > From: Justin Fletcher [mailto:[EMAIL PROTECTED] > Sent: Thursday, January 17, 2008 3:58 PM > To: Marat Nepomnyashy > Cc: Shane McKinley; vyatta-users@mailman.vyatta.com > Subject: Re: [Vyatta-users] Waiting for xorp_rtrmgr... > > You'll also want to edit /etc/syslog.conf and change *.warning to *.* to > record all log messages; otherwise, lower-level messages will be > discared > > You can check startup by hand by running "/etc/init.d/vyatta-rtrmgr > start" which will save you the physical reboot -- > > Justin > > On Jan 17, 2008 12:54 PM, Marat Nepomnyashy <[EMAIL PROTECTED]> wrote: > > Hi Shane, > > > > Most likely the rtrmgr did not start. The best log file to check when > > > that happens is '/var/log/messages'. > > > > Which Vyatta version are you using? > > > > Thanks, > > Marat > > > > > > ----- Original Message ----- > > From: "Shane McKinley" <[EMAIL PROTECTED]> > > To: <vyatta-users@mailman.vyatta.com> > > Sent: Thursday, January 17, 2008 12:51 PM > > Subject: [Vyatta-users] Waiting for xorp_rtrmgr... > > > > > > > After entering some static routes and changing some subnetting > > > around I rebooted. Now the rtrmgr won't start -- the commit took > > > fine before I rebooted. > > > > > > Is there a way I can pull the proper error messages to troubleshoot > > > this problem? What log files would be best to look at? > > > > > > Any more ideas on why this would happen? I really am dedicated to > > > getting this router into production, but the odds seem against me > > > this round. > > > > > > Thanks, > > > > > > Shane McKinley > > > Habersham EMC > > > Tel: 706-839-4130 > > > Cel: 706-968-3186 > > > _______________________________________________ > > > Vyatta-users mailing list > > > Vyatta-users@mailman.vyatta.com > > > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > > > > > > _______________________________________________ > > Vyatta-users mailing list > > Vyatta-users@mailman.vyatta.com > > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users