I actually couldn't figure how to get the firewall made in vyatta... I ended up just making an rc script to build iptables on startup. :D
Nate I'll give this a try and let you know. If I can get it working I'll write up a howto. On Tue, 2008-02-05 at 08:05 -0800, Justin Fletcher wrote: > Sure - you can give it a try. Just remember that your iptables will > be overwritten > by the Vyatta configuration, so you'll need to set up a mechanism to ensure > that > this runs after the Vyatta configuration files set up iptables, > through an appropriate > rc script. > > Justin > > On Feb 5, 2008 4:40 AM, Nathan McBride <[EMAIL PROTECTED]> wrote: > > "Sorry, but no - Debian Linux under the hood :-)" > > > > Ok, and? > > > > http://packages.debian.org/etch/linux-igd > > > > Nate > > > > > > > > On Mon, 2008-02-04 at 22:14 -0800, Justin Fletcher wrote: > > > Sorry, but no - Debian Linux under the hood :-) > > > > > > Justin > > > > > > On Feb 4, 2008 10:02 PM, Nathan McBride <[EMAIL PROTECTED]> wrote: > > > > Ok, I'll create a nat rule for each... I was hoping there was uPnP > > > > support. > > > > > > > > Nate > > > > > > > > > > > > On Mon, 2008-02-04 at 21:55 -0800, Justin Fletcher wrote: > > > > > Port forwarding should be straight-forward with the Vyatta CLI; look > > > > > for recent > > > > > ssh examples on this list. > > > > > > > > > > Personally, I'd create a rule for each protocol and port/port range. > > > > > > > > > > Best, > > > > > Justin > > > > > > > > > > On Feb 4, 2008 8:31 PM, Nathan McBride <[EMAIL PROTECTED]> wrote: > > > > > > Hey guys, I finally got my old comp which is running vyatta to now > > > > > > be a > > > > > > wireless vyatta router. So I can connect my Playstation 3 to the > > > > > > router > > > > > > and it goes on the network and most things work. However it only > > > > > > has > > > > > > what playstation calls nat3. This is because it isn't getting all > > > > > > the > > > > > > ports it needs. The playstation 3 needs: > > > > > > > > > > > > • TCP Ports: 80, 443, 5223, and 10070 - 10080 > > > > > > • UDP Ports: 3478, 3479, 3658, and 10070 > > > > > > > > > > > > I don't care about 80 and 443. However I really want to get nat2 > > > > > > working because I'm having issues with Unreal III. What would be > > > > > > the > > > > > > best way to do this? Can / should I create an iptables rule to > > > > > > make a > > > > > > DMZ zone? I had to make the firewall with iptables not vyatta > > > > > > cause I > > > > > > couldn't figure it out... :'( Should I just create a nat rule for > > > > > > each > > > > > > port and forward it to my playstation's ip after setting it as > > > > > > static? > > > > > > > > > > > > Thanks, > > > > > > Nate > > > > > > > > > > > > _______________________________________________ > > > > > > Vyatta-users mailing list > > > > > > Vyatta-users@mailman.vyatta.com > > > > > > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > > > > > > > > > > > > > > > > >
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
