Peter What I'm saying is that it doesn't need to be opened or decompressed. It is the binary file that loads on to the Sipura - as is.
I haven't personally performed a firmware upgrade but I am reliably informed you use the web interface, click the browse button on the upgrade page to select the .bin file (on your Mac) and voila! This is how we do it on the Linksys PAP2 which, as I said, uses the same or similar firmware. I hope this works. Cheers Greg > From: Peter Sealy <[EMAIL PROTECTED]> > Date: Wed, 16 Nov 2005 15:58:03 +1100 > To: Greg Pennefather <[EMAIL PROTECTED]> > Cc: WAMUG Mailing List <wamug@wamug.org.au> > Subject: Re: bin file > > > On 16/11/2005, at 2:08 PM, Greg Pennefather wrote: > >> Peter >> >> If it is firmware for you Sipura then it is likely that the .bin >> file is the >> firmware file. We are doing a fair bit of work with the Linksys >> PAP2 which >> has Sipura firmware and the files are .bin. Check with Sipura or >> you VoIP >> provider to confirm. >> >> Regards >> >> >> Greg >> > > > Greg > > Thanks. Yes, I know that the firmware file is the .bin file. But I > can not open/decompress it so I can install it. > > > ......... > > Peter Sealy > Thurgoona AUSTRALIA >
