Brian thanks for this, turns out the person from dick smith gave me 3 cartridges for this printer and 1 for a different epson printer that looks absolutely identical, hence the reseating error - however your email helped me work it out, many thanks. Best regards
Justin On 11 Oct 2010, at 5:45 PM, Brian Risbey wrote: > > Hi Justin, > > found this via google search, might help > > Brian > > > > > > > http://www.justanswer.com/questions/pz82-epson-stylus-cx6000-printer-error-e-02 > > > which said: > > > Hello, and welcome back to Just Answer! > > > The E-02 error indicates that a cartridge is expended or not installed > properly. > > You have stated that you have reseated it and are getting the same error. > > The printer should have an arrow pointing to which cartridge is giving you > the error. If it is the same one you just reinstalled, there is a good chance > that the contacts on the cartridge are defective and you need to bring it > back to where you purchased it and exchange it for another cartridge. Once > you get the new cartridge, install it and that should take care of the > problem. > > You can also go into the print software and check the levels of the other > cartridges -- if one is empty it may be causing this error. What happens is > when you reseat a new cartridge it will "charge" the cartridge -- prime it, > flush ink through it, then set it. After the printer ran this diagnostic, it > may have used up the last of another color cartridge's ink. > > You can check the other ink levels by clicking the printer icon down near the > clock in the task bar and going to the printing preferences' maintenance tab > status monitor. You can also access it by clicking start / control panel / > printers & faxes / right click on printer icon / printing preferences / > maintenance tab / status monitor. > > If you are still having a problem, you can call Epson technical support at > (XXX)XXX-XXXX. Be sure to get your serial number which is located near the > ink cartridges. It is an number beginning with JGJY. > > > > > > > > > > > > > > > > Read more: Epson Stylus CX6000 printer error E-02? - JustAnswer > http://www.justanswer.com/questions/pz82-epson-stylus-cx6000-printer-error-e-02#ixzz122f2kEeU > On 11/10/2010, at 4:52 PM, Justin Davies wrote: > > Hi all, a little off topic however knowing the good folks at wamug someone is > likely to have had this issue before. Like many mac users I've got an epson > printer. I have an epson printer rx350 that is giving me a E-02 error - I've > replaced the ink cartridge that is empty however it isn't fixing it. > > It isn't responding, the epson website doesn't state what the error is or how > to resolve it, can anyone assist. > Thanks in advance! > Best regards > > > > Justin Davies > m...@justindavies.com.au > www.justindavies.com.au > 0414 567 638 > 9309 9309 > > Linked In: www.linkedin.com/in/justinkdavies > Business website: www.emergination.com.au > Twitter: www.twitter.com/justinkdavies > > > > > > > -- The WA Macintosh User Group Mailing List -- > Archives - <http://www.wamug.org.au/mailinglist/archives.shtml> > Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml> > Unsubscribe - <mailto:wamug-unsubscr...@wamug.org.au> > > > > > -- The WA Macintosh User Group Mailing List -- > Archives - <http://www.wamug.org.au/mailinglist/archives.shtml> > Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml> > Unsubscribe - <mailto:wamug-unsubscr...@wamug.org.au> > -- The WA Macintosh User Group Mailing List -- Archives - <http://www.wamug.org.au/mailinglist/archives.shtml> Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml> Unsubscribe - <mailto:wamug-unsubscr...@wamug.org.au>