Hi, on my hardware (x86-based, Intel UHD Graphics 630) I have several connectors (DVI and DisplayPorts). I use the Weston compositor version 9.0.0.
I would like to configure the system so that precisely one output is active, i.e. there should not be any "extended" desktop, just one main desktop where my application shows up and that's all. My first try was to clone monitor output using the "same-as" parameter in the Weston config, but unfortunately monitor cloning does not work on my hardware (see also https://gitlab.freedesktop.org/wayland/weston/-/issues/333). As an alternative I would like to switch off all but one connector. More precisely: - If a monitor is connected to the DVI-port, disable all DisplayPorts - If a monitor is connected to a DisplayPort, disable the DVI-port and all other DisplayPorts. - If there are multiple monitors connected, only enable e.g. DVI and disable all others. This should be done automatcally, e.g. in a start-up script, without user interaction. On Xorg I would use xrandr to achieve this. Is there an equivalent for Wayland/Weston? Best, Holger _______________________________________________ wayland-devel mailing list wayland-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/wayland-devel