On Fri, 09 Sep 2022, Hans de Goede <hdego...@redhat.com> wrote: > Hi all, > > Here is v2 of my "drm/kms: control display brightness through drm_connector > properties" RFC: > > Changes from version 1: > - Drop bl_brightness_0_is_min_brightness from list of new connector > properties. > - Clearly define that 0 is always min-brightness when setting the brightness > through the connector properties. > - Drop bl_brightness_control_method from list of new connector > properties. > - Phase 1 of the plan has been completed > > As discussed already several times in the past: > https://www.x.org/wiki/Events/XDC2014/XDC2014GoedeBacklight/ > > https://lore.kernel.org/all/4b17ba08-39f3-57dd-5aad-d37d844b0...@linux.intel.com/ > > The current userspace API for brightness control offered by > /sys/class/backlight devices has various issues: > > 1. There is no way to map the backlight device to a specific > display-output / panel (1) > 2. Controlling the brightness requires root-rights requiring > desktop-environments to use suid-root helpers for this. > 3. The meaning of 0 is not clearly defined, it can be either off, > or minimum brightness at which the display is still readable > (in a low light environment) > 4. It's not possible to change both the gamma and the brightness in the > same KMS atomic commit. You'd want to be able to reduce brightness to > conserve power, and counter the effects of that by changing gamma to > reach a visually similar image. And you'd want to have the changes take > effect at the same time instead of reducing brightness at some frame and > change gamma at some other frame. This is pretty much impossible to do > via the sysfs interface. > > As already discussed on various conference's hallway tracks > and as has been proposed on the dri-devel list once before (2), > it seems that there is consensus that the best way to to solve these > 2 issues is to add support for controlling a video-output's brightness > through properties on the drm_connector. > > This RFC outlines my plan to try and actually implement this, > which has 3 phases: > > > Phase 1: Stop registering multiple /sys/class/backlight devs for a single > display > ================================================================================= > > On x86 there can be multiple firmware + direct-hw-access methods > for controlling the backlight and in some cases the kernel registers > multiple backlight-devices for a single internal laptop LCD panel. > > A plan to fix this was posted here: > https://lore.kernel.org/dri-devel/98519ba0-7f18-201a-ea34-652f50343...@redhat.com/ > And a pull-req actually implementing this plan has been send out this week: > https://lore.kernel.org/dri-devel/261afe3d-7790-e945-adf6-a2c96c9b1...@redhat.com/ > > > Phase 2: Add drm_connector properties mirroring the matching backlight device > ============================================================================= > > The plan is to add a drm_connector helper function, which optionally takes > a pointer to the backlight device for the GPU's native backlight device, > which will then mirror the backlight settings from the backlight device > in a set of read/write brightness* properties on the connector. > > This function can then be called by GPU drivers for the drm_connector for > the internal panel and it will then take care of everything. When there > is no native GPU backlight device, or when it should not be used then > (on x86) the helper will use the acpi_video_get_backlight_type() to > determine which backlight-device should be used instead and it will find > + mirror that one. > > > Phase 3: Deprecate /sys/class/backlight uAPI > ============================================ > > Once most userspace has moved over to using the new drm_connector > brightness props, a Kconfig option can be added to stop exporting > the backlight-devices under /sys/class/backlight. The plan is to > just disable the sysfs interface and keep the existing backlight-device > internal kernel abstraction as is, since some abstraction for (non GPU > native) backlight devices will be necessary regardless. > > It is unsure if we will ever be able to do this. For example people using > non fully integrated desktop environments like e.g. sway often use custom > scripts binded to hotkeys to get functionality like the brightness > up/down keyboard hotkeys changing the brightness. This typically involves > e.g. the xbacklight utility. > > Even if the xbacklight utility is ported to use kms with the new connector > object brightness properties then this still will not work because > changing the properties will require drm-master rights and e.g. sway will > already hold those. > > > The drm_connector brightness properties > ======================================= > > The new uAPI for this consists of 2 properties: > > 1. "display brightness": rw 0-int32_max property controlling the brightness > setting > of the connected display. The actual maximum of this will be less then > int32_max and is given in "display brightness max".
This could use a few words explaining the choice of range and property type. (I assume it's because you can't change a range property's max at runtime. Which is also why you need a separate max property.) > Unlike the /sys/class/backlight/foo/brightness this brightness property > has a clear definition for the value 0. The kernel must ensure that 0 > means minimum brightness (so 0 should _never_ turn the backlight off). > If necessary the kernel must enforce a minimum value by adding > an offset to the value seen in the property to ensure this behavior. > > For example if necessary the driver must clamp 0-255 to 10-255, which then > becomes 0-245 on the brightness property, adding 10 internally to writes > done to the brightness property. This adding of an extra offset when > necessary must only be done on the brightness property, > the /sys/class/backlight interface should be left unchanged to not break > userspace which may rely on 0 = off on some systems. > > Note amdgpu already does something like this even for /sys/class/backlight, > see the use of AMDGPU_DM_DEFAULT_MIN_BACKLIGHT in amdgpu. > > Also whenever possible the kernel must ensure that the brightness range > is in perceived brightness, but this cannot always be guaranteed. Do you mean every step should be a visible change? > 2. "display brightness max": ro 0-int32_max property giving the actual maximum > of the display's brightness setting. This will report 0 when brightness > control is not available. > > The value of "display brightness max" may change at runtime, either by > a legacy drivers/platform/x86 backlight driver loading after the drm > driver has loaded; or when plugging in a monitor which allows brightness > control over DDC/CI. In both these cases the max value will change from 0 > to the actual max value, indicating backlight control has become available > on this connector. I think this could be a bit more restrictive in stating the allowed runtime changes. Is it only 0 -> actual max for non-hotpluggable displays, nothing else, and additionally actual max -> 0 when unplugging a display? > > > Future extensions > ================= > > Some hardware do adaptive brightness in hardware, rather then providing > an ALS sensor and letting userspace handle this. > > One example of this is the Steam deck, which currently uses some custom > sysfs attributes to allow tweaking (and enable/disable?) the adaptive > brightness. Adding standardized uAPI for this through new > "display brightness *" properties seems like a natural extension of this > proposal. Another example is adjusting for non-linear luminance curve. It would be nicer for equal steps in brightness value to have similar luminance changes. I think sometimes we lose precision with the limited number of steps in UIs. But this is thinking pretty far ahead. :) Other than the minor clarifications, the plans sounds good to me. Thanks again for doing all this, much appreciated! BR, Jani. > > Regards, > > Hans > > > 1) The need to be able to map the backlight device to a specific display > has become clear once more with the recent proposal to add DDCDI support: > https://lore.kernel.org/lkml/20220403230850.2986-1-yusisameri...@gmail.com/ > > 2) > https://lore.kernel.org/all/4b17ba08-39f3-57dd-5aad-d37d844b0...@linux.intel.com/ > Note this proposal included a method for userspace to be able to tell the > kernel if the native/acpi_video/vendor backlight device should be used, > but this has been solved in the kernel for years now: > https://www.spinics.net/lists/linux-acpi/msg50526.html > An initial implementation of this proposal is available here: > https://cgit.freedesktop.org/~mperes/linux/log/?h=backlight > > -- Jani Nikula, Intel Open Source Graphics Center