Me too! For the first time in two weeks!
On Jun 21, 8:20 am, Adon Metcalfe <adon.metca...@gmail.com> wrote:
> Also FYI for me its started working again =)
>
> On Sun, Jun 21, 2009 at 1:24 PM, mdipierro <mdipie...@cs.depaul.edu> wrote:
>
> > good point. I will ask.
>
> > On Jun 21, 12:16 am, JohnMc <maruadventu...@gmail.com> wrote:
> > > Massimo,
>
> > > I notice in this discussion that the dates that many of the failures
> > > seem be to occuring on the weekends 7th, 14th and now the 20th. Does
> > > the DePaul network team perform maintenance schedules on the
> > > weekends?
>
> > > JohnMc
>
> > > On Jun 20, 11:52 pm, mdipierro <mdipie...@cs.depaul.edu> wrote:
>
> > > > Can you try once more and tell me if anything has changed?
>
> > > > Massimo
>
> > > > On Jun 20, 10:59 pm, adonm <adon.metca...@gmail.com> wrote:
>
> > > > > Yeah I'm experiencing the same, but I'm in Australia
>
> > > > > Through iinet (@home) I get
>
> > > > > tracepath web2py.com
> > > > > 1: 192.168.1.20 (192.168.1.20) 0.214ms
> > > > > pmtu 1500
> > > > > 1: my.router (192.168.1.254) 2.734ms
> > > > > 1: my.router (192.168.1.254) 4.550ms
> > > > > 2: nexthop.wa.ii.net (203.59.14.16) 26.722ms
> > > > > 3: gi2-3.per-qv1-bdr2.ii.net (203.215.4.30) 50.684ms
> > > > > 4: gi0-15-1-0.syd-stl-core1.ii.net (203.215.20.64) 82.413ms
> > > > > asymm 5
> > > > > 5: 202.139.19.37 (202.139.19.37) 82.608ms
> > > > > asymm 7
> > > > > 6: 203.208.192.201 (203.208.192.201) 289.825ms
> > > > > asymm 9
> > > > > 7: gi1-7.ccr01.lax04.atlas.cogentco.com (154.54.12.221) 289.277ms
> > > > > asymm 8
> > > > > 8: te8-3.ccr02.lax01.atlas.cogentco.com (154.54.2.237) 283.725ms
> > > > > asymm 9
> > > > > 9: te3-8.ccr02.iah01.atlas.cogentco.com (154.54.5.193) 311.391ms
> > > > > asymm 11
> > > > > 10: te3-8.mpd02.iah01.atlas.cogentco.com (154.54.0.246) 313.274ms
> > > > > asymm 12
> > > > > 11: te8-1.mpd01.dfw01.atlas.cogentco.com (154.54.7.253) 329.011ms
> > > > > asymm 13
> > > > > 12: te4-3.mpd01.mci01.atlas.cogentco.com (154.54.5.158) 352.054ms
> > > > > asymm 11
> > > > > 13: no reply
> > > > > 14: vl3489.mpd01.ord03.atlas.cogentco.com (154.54.5.18) 341.370ms
> > > > > asymm 13
> > > > > 15: DePaul.demarc.cogentco.com (66.250.5.34) 306.553ms
> > > > > asymm 13
> > > > > 16: mfc-sac-1s-v844.netequip.depaul.edu (140.192.9.145) 293.154ms
> > > > > asymm 14
> > > > > 17: mfc-cst-bs-v841.netequip.depaul.edu (140.192.9.177) 293.692ms
> > > > > asymm 15
> > > > > 18: no reply
> > > > > 19: no reply
> > > > > 20: no reply
> > > > > ^C
>
> > > > > and through globaldial (my company's isp) I get success (atm I'm
> > > > > tunneling via work to get to web2py.com, but depauls network guys
> > > > > really should take a look?) it does appear to be the firewall at the
> > > > > end of the chain
>
> > > > > tracepath web2py.com
> > > > > 1: 5.167.209.203.static.globaldial.com (203.209.167.5) 0.356ms
> > > > > pmtu 1500
> > > > > 2: kryten (203.209.167.1) 0.574ms
> > > > > pmtu 1460
> > > > > 2: Globaldial-Labyrinthdata.globaldial.com (203.24.54.237)
> > 65.863ms
> > > > > 3: ge-0-0-5.core-pop1-per.globaldial.com (203.24.54.33) 36.294ms
> > > > > 4: FastEthernet-12-1-0.GW1.PER1.ALTER.NET (203.166.42.181)
> > 62.458ms
> > > > > 5: 421.AT-6-0-0.XL2.PER1.ALTER.NET (210.80.32.113) 63.814ms
> > > > > asymm 6
> > > > > 6: 0.so-1-1-1.XT4.SYD2.ALTER.NET (210.80.33.29) 118.895ms
> > > > > asymm 7
> > > > > 7: 0.so-4-1-0.IR2.SAC2.Alter.Net (210.80.48.93) 258.628ms
> > > > > asymm 8
> > > > > 8: 0.so-2-0-0.IL2.SAC1.ALTER.NET (152.63.48.41) 263.628ms
> > > > > asymm 9
> > > > > 9: 0.so-5-2-0.XT2.SCL2.ALTER.NET (152.63.1.69) 277.118ms
> > > > > asymm 10
> > > > > 10: po2-1.core01.sjc03.atlas.cogentco.com (154.54.13.113) 261.189ms
> > > > > asymm 11
> > > > > 11: te2-4.mpd01.sjc03.atlas.cogentco.com (154.54.6.85) 256.958ms
> > > > > asymm 15
> > > > > 12: te2-2.mpd01.sjc01.atlas.cogentco.com (66.28.4.73) 276.928ms
> > > > > asymm 13
> > > > > 13: te2-1.mpd01.sfo01.atlas.cogentco.com (154.54.1.25) 293.688ms
> > > > > asymm 14
> > > > > 14: te2-1.mpd01.mci01.atlas.cogentco.com (154.54.6.37) 322.677ms
> > > > > 15: no reply
> > > > > 16: vl3489.mpd01.ord03.atlas.cogentco.com (154.54.5.18) 377.949ms
> > > > > asymm 12
> > > > > 17: DePaul.demarc.cogentco.com (66.250.5.34) 308.701ms
> > > > > asymm 14
> > > > > 18: mfc-sac-1s-v844.netequip.depaul.edu (140.192.9.145) 308.597ms
> > > > > asymm 14
> > > > > 19: mfc-cst-bs-v841.netequip.depaul.edu (140.192.9.177) 327.921ms
> > > > > asymm 15
> > > > > 20: 140.192.37.194 (140.192.37.194) 322.006ms
> > > > > reached
> > > > > Resume: pmtu 1460 hops 20 back 49
>
> > > > > For reference both these IP's are in the 203 block
> > > > > home (doesn't work): 203.59.99.179
> > > > > companyisp (does work): 203.209.167.0/24 (we own the subnet)
>
> > > > > On Jun 20, 10:43 pm, Jason Brower <encomp...@gmail.com> wrote:
>
> > > > > > There was some mention of a firewall. Sadly, I think we are on
> > that
> > > > > > list. I don't think it's punishment though. :P
>
> > > > > > On Sat, 2009-06-20 at 08:30 -0500, Douglas Horst wrote:
> > > > > > > It's not working for me either from home but it is from work.
> > Both
> > > > > > > are in the Chicago area. Trace route from home still dies at
> > > > > > > mfc-cst-bs-v841.netequip.depaul.edu.
>
> > > > > > > On Thu, Jun 18, 2009 at 7:14 PM, Yarko Tymciurak <
> > yark...@gmail.com>
> > > > > > > wrote:
> > > > > > > look athttp://en.wikipedia.org/wiki/Tracerouteforlistsof
> > > > > > > tools; if going to the ip address directly doesn't work
> > for
> > > > > > > you (nslookupwww.web2py.com), you can try to filter just
> > http
> > > > > > > messages with wireshark to see what messages are going
> > back /
> > > > > > > forth.
>
> > > > > > > I'm not having trouble - but I'm in the Chicago area (and
> > so
> > > > > > > isweb2py.com); I did note that the first access
> > toweb2py,
> > > > > > > tracepath showed a _really_ long delay at what looks like
> > the
> > > > > > > gateway into DePaul...
>
> > > > > > > On Thu, Jun 18, 2009 at 6:37 PM, Eddie Eyles
> > > > > > > <ho...@heddonsgate.co.uk> wrote:
>
> > > > > > > I'm getting a gateway timeout again, trying to
> > open
> > > > > > > web2py.com. This
> > > > > > > after several days of no problems at all.
> > > > > > > Surprisingly, traceroute
> > > > > > > shows all nodes responding, all the way through
> > to the
> > > > > > > web2py.com
> > > > > > > host. Does anyone know how to diagnose this kind
> > of
> > > > > > > problem?
>
> > > > > > > Eddie
>
> > > > > > > On Jun 14, 10:04 pm, mdipierro
> > > > > > > <mdipie...@cs.depaul.edu> wrote:
> > > > > > > > I do not know. It works now.
>
> > > > > > > > On Jun 14, 11:46 am, Jesse Bever
> > > > > > > <jesse.be...@gmail.com> wrote:
>
> > > > > > > > > I still can't accessweb2py.com :(. The trace
> > > > > > > still dies at
> > > > > > > > > mfc-cst-bs-v841.netequip.depaul.edu. Is
> > there some
> > > > > > > firewall that is
> > > > > > > > > filtering out certain ip ranges? I can access
> > it
> > > > > > > from work but not from
> > > > > > > > > home.
>
> > > > > > > > > On Mon, Jun 8, 2009 at 8:14 AM, mdipierro
> > > > > > > <mdipie...@cs.depaul.edu> wrote:
>
> > > > > > > > > > I was having problems from home. At the
> > office
> > > > > > > everything looks fine
> > > > > > > > > > but I restarted the server anyway.
>
> > > > > > > > > > Does it work for you know? If not, any hint
> > > > > > > about the problem?
> > > > > > > > > > Could it have been temporary DNS issue?
>
> > > > > > > > > > The log shows people have been accessing
> > the
> > > > > > > server all along.
>
> > > > > > > > > > Massimo
>
> > > > > > > > > > On Jun 7, 11:51 pm, Yarko Tymciurak
> > > > > > > <yark...@gmail.com> wrote:
> > > > > > > > > > > interesting.... nslookup shows
> > > > > > > this:http://140.192.37.194/-andthat
> > > > > > > > > > > returns too...
>
> > > > > > > > > > > Is this some DNS thing? You should be
> > able to
> > > > > > > get to the address (if it
> > > > > > > > > > > is)...
>
> > > > > > > > > > > I can - but i have been able to get to it
> > by
> > > > > > > name all afternoon /
> > > > > > > > > > evening...
>
> > > > > > > > > > > On Sun, Jun 7, 2009 at 9:56 PM, Jesse
> > Bever
> > > > > > > <jesse.be...@gmail.com>
> > > > > > > > > > wrote:
> > > > > > > > > > > > I can't access it it either I thought
> > it was
> > > > > > > just me
>
> > > > > > > > > > > > On Sun, Jun 7, 2009 at 1:30 PM, Hans
> > Donner
> > > > > > > <hans.don...@pobox.com>
> > > > > > > > > > wrote:
>
> > > > > > > > > > > >> for me it works fine...
>
> > > > > > > > > > > >> On Sun, Jun 7, 2009 at 10:27 PM,
> > > > > > > mdipierro<mdipie...@cs.depaul.edu>
> > > > > > > > > > > >> wrote:
>
> > > > > > > > > > > >> > Now I cannot accessweb2py.comeither.
> > > > > > > I
>
> ...
>
> read more »
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"web2py Web Framework" group.
To post to this group, send email to web2py@googlegroups.com
To unsubscribe from this group, send email to
web2py+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/web2py?hl=en
-~----------~----~----~----~------~----~------~--~---
