On Wed, 2018-06-06 at 13:51 +0800, tugouxp wrote: > hi normand: > > and besides, the midori browser output a warning pre-playing seems > related to this issue, hope some help for help me, thank you again! > > ** (midori4:1946): WARNING **: GDK is not able to create a GL > context, falling back to glReadPixels (slow!): No GL implementation > is available > >
This doesn't look very good indeed... Have you tried WPE? It fits much better than WebKitGTK on embedded platforms such as yours. Philippe > > > > At 2018-06-05 17:28:45, "tugouxp" <[email protected]> wrote: > > hi normand: > > > > my platform is based on allwinner R18 , four cores A72, with GPU > > Mali400mp2, OpenGLES2 driver support, the library we use are > > follows: > > after deep investigate, all the library is just a symble link > > except libMali.so, so actually libMali.so behaves the key role, > > hope have some help. > > > > -rwxrwxr-x 1 caozilong 19 5月 15 19:08 aw_version > > lrwxrwxrwx 1 caozilong 11 5月 15 19:08 libEGL.so -> > > libEGL.so.1 > > lrwxrwxrwx 1 caozilong 13 5月 15 19:08 libEGL.so.1 -> > > libEGL.so.1.4 > > lrwxrwxrwx 1 caozilong 10 5月 15 19:08 libEGL.so.1.4 -> > > libMali.so > > lrwxrwxrwx 1 caozilong 11 5月 15 19:08 libgbm.so -> > > libgbm.so.1 > > lrwxrwxrwx 1 caozilong 10 5月 15 19:08 libgbm.so.1 -> > > libMali.so > > lrwxrwxrwx 1 caozilong 17 5月 15 19:08 libGLESv1_CM.so -> > > libGLESv1_CM.so.1 > > lrwxrwxrwx 1 caozilong 19 5月 15 19:08 libGLESv1_CM.so.1 -> > > libGLESv1_CM.so.1.1 > > lrwxrwxrwx 1 caozilong 10 5月 15 19:08 libGLESv1_CM.so.1.1 -> > > libMali.so > > lrwxrwxrwx 1 caozilong 14 5月 15 19:08 libGLESv2.so -> > > libGLESv2.so.2 > > lrwxrwxrwx 1 caozilong 16 5月 15 19:08 libGLESv2.so.2 -> > > libGLESv2.so.2.0 > > lrwxrwxrwx 1 caozilong 10 5月 15 19:08 libGLESv2.so.2.0 -> > > libMali.so > > -rwxrwxr-x 1 caozilong 1786848 5月 15 19:08 libMali.so > > lrwxrwxrwx 1 caozilong 10 5月 15 19:08 libwayland-egl.so -> > > libMali.s > > > > and the two commands with waylandsink and glimagesink works fine > > . > > gst-launch-1.0 playbin uri=file:///tmp/test.mp4 video- > > sink="waylandsink x=0 y=0 width=400 height=400" > > gst-launch-1.0 playbin uri=file:///mnt/UDISK/movie.mp4 video- > > sink="glimagesink x=0 y=0 width=400 height=400" > > thanks! > > > > > > > > > > At 2018-06-05 16:49:17, "Philippe Normand" <[email protected]> > > wrote: > > > I don’t see outstanding errors, playback seems to work, there’s a > > > video decoder error but I’m not sure it’s relevant… > > > Did you really enable OpenGL in packageconfig? > > > What is your platform exactly? which GPU? which GL driver? > > > > > > > > > > > > > On 5 Jun 2018, at 04:19, tugouxp <[email protected]> wrote: > > > > > > > > hi brothers: > > > > > > > > thanks for your advice. > > > > and i do the test as you said, got the logfile. > > > > the attachment is the log file ,please notice. > > > > thanks for your good advice again! > > > > > > > > > > > > > > > > > > > > At 2018-06-04 21:23:56, "Philippe Normand" <[email protected]> > > > > wrote: > > > > > Ah ok, if you have waylandsink working too, I think you can > > > > > try with WebKit now, set these env vars: > > > > > > > > > > export GST_DEBUG=“3,webkit*:6” > > > > > export GST_DEBUG_FILE=gst.log > > > > > > > > > > then run the browser and try to play a video and send the > > > > > gst.log file. > > > > > > > > > > Philippe > > > > > > > > > > > On 4 Jun 2018, at 14:14, 13824125580 <[email protected]> > > > > > > wrote: > > > > > > > > > > > > so the appsink cannt be changed,right？my project is based > > > > > > on wayland display backend,i found the waylandsink works > > > > > > fine with gst_play,so,the appsink also take wayland as its > > > > > > display backend,is it? > > > > > > > > > > > > > > > > > > > > > > > > 发自我的小米手机 > > > > > > 在 Philippe Normand <[email protected]>，2018年6月4日 下午8:41写道： > > > > > > > I asked you to test gst-play with glimagesink first so as > > > > > > > to discard GStreamer issues. If that works well on your > > > > > > > platform, move on to WebKit testing. > > > > > > > The appsink we use in WebKit behaves similarly to > > > > > > > glimagesink. > > > > > > > > > > > > > > Philippe > > > > > > > > > > > > > > > On 4 Jun 2018, at 13:25, tugouxp <[email protected]> > > > > > > > > wrote: > > > > > > > > > > > > > > > > hi brother: > > > > > > > > > > > > > > > > thanks for your suggestions and i do the updating at > > > > > > > > once. > > > > > > > > > > > > > > > > by the way, the webkit select "appsink" higher > > > > > > > > precedence than "webkit video sink", in the last mail, > > > > > > > > you suggest me "glimagesink" too, > > > > > > > > > > > > > > > > but which sinker should be select in webkit framework > > > > > > > > for my problem ? did any relationsbetween appsink and > > > > > > > > glimagesink, did the appsink is just a wrapper of > > > > > > > > glimagesink, > > > > > > > > so we can know whether the appsink works right by > > > > > > > > testing the glimagesink directly? > > > > > > > > > > > > > > > > thanks for your kindly supoort. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > At 2018-06-04 19:21:27, "Philippe Normand" <philn@igali > > > > > > > > a.com> wrote: > > > > > > > > > gst-gl is part of gst-plugins-base in that version of > > > > > > > > > GStreamer. You’re using a pre-release though, I > > > > > > > > > advise to upgrade to 1.14. > > > > > > > > > > > > > > > > > > Philippe > > > > > > > > > > > > > > > > > > > On 4 Jun 2018, at 12:13, tugouxp <[email protected] > > > > > > > > > > om> wrote: > > > > > > > > > > > > > > > > > > > > Hi brother: > > > > > > > > > > > > > > > > > > > > sorry for fogotten the cc thing. > > > > > > > > > > my gst version is "1.13.90", from the official > > > > > > > > > > webkit ,i only found the "gst-plugins-gl- > > > > > > > > > > 0.10.3.tar.gz" seems like "gstreamer_gl" you said > > > > > > > > > > , but the version seems did not match with the > > > > > > > > > > gstrreamer, and the latest update day is 2012,. > > > > > > > > > > is this the gl package you said? > > > > > > > > > > > > > > > > > > > > much appreciate your help. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > At 2018-06-04 18:51:07, "Philippe Normand" <philn@i > > > > > > > > > > galia.com> wrote: > > > > > > > > > > > When replying please keep the mailing list in CC > > > > > > > > > > > to To: fields... > > > > > > > > > > > > > > > > > > > > > > > On 4 Jun 2018, at 10:04, tugouxp <13824125580@1 > > > > > > > > > > > > 63.com> wrote: > > > > > > > > > > > > > > > > > > > > > > > > hi folks : > > > > > > > > > > > > > > > > > > > > > > > > My project is based on yoccto 2.5 project, > > > > > > > > > > > > with the kernel version is 4.9 and webkit is > > > > > > > > > > > > 2.20.2. > > > > > > > > > > > > > > > > > > > > > > > > a part of my bb file is as follows, so you can > > > > > > > > > > > > see , the display window show normal only if > > > > > > > > > > > > the opengl and gst_gl must be deleted. > > > > > > > > > > > > 53 > > > > > > > > > > > > 54 #PACKAGECONFIG ??= "wayland opengl gles2 web > > > > > > > > > > > > crypto gst_gl" > > > > > > > > > > > > 55 PACKAGECONFIG ??= "wayland gles2 webcrypto" > > > > > > > > > > > > 56 > > > > > > > > > > > > 57 PACKAGECONFIG[wayland] = "- > > > > > > > > > > > > DENABLE_WAYLAND_TARGET=ON,- > > > > > > > > > > > > DENABLE_WAYLAND_TARGET=OFF,wayland wayland- > > > > > > > > > > > > native" > > > > > > > > > > > > 58 PACKAGECONFIG[x11] = "- > > > > > > > > > > > > DENABLE_X11_TARGET=ON,- > > > > > > > > > > > > DENABLE_X11_TARGET=OFF,virtual/libx11" > > > > > > > > > > > > 59 PACKAGECONFIG[geoclue] = "- > > > > > > > > > > > > DENABLE_GEOLOCATION=ON,- > > > > > > > > > > > > DENABLE_GEOLOCATION=OFF,geoclue" > > > > > > > > > > > > 60 PACKAGECONFIG[enchant] = "- > > > > > > > > > > > > DENABLE_SPELLCHECK=ON,- > > > > > > > > > > > > DENABLE_SPELLCHECK=OFF,enchant" > > > > > > > > > > > > 61 PACKAGECONFIG[gtk2] = "- > > > > > > > > > > > > DENABLE_PLUGIN_PROCESS_GTK2=ON,- > > > > > > > > > > > > DENABLE_PLUGIN_PROCESS_GTK2=OFF,gtk+" > > > > > > > > > > > > 62 PACKAGECONFIG[gles2] = "-DENABLE_GLES2=ON,- > > > > > > > > > > > > DENABLE_GLES2=OFF,virtual/libgles2" > > > > > > > > > > > > 63 PACKAGECONFIG[webgl] = "-DENABLE_WEBGL=ON,- > > > > > > > > > > > > DENABLE_WEBGL=OFF,virtual/libgl" > > > > > > > > > > > > 64 PACKAGECONFIG[opengl] = "- > > > > > > > > > > > > DENABLE_OPENGL=ON,- > > > > > > > > > > > > DENABLE_OPENGL=OFF,virtual/libgl" > > > > > > > > > > > > 65 PACKAGECONFIG[libsecret] = "- > > > > > > > > > > > > DUSE_LIBSECRET=ON,- > > > > > > > > > > > > DUSE_LIBSECRET=OFF,libsecret" > > > > > > > > > > > > 66 PACKAGECONFIG[libhyphen] = "- > > > > > > > > > > > > DUSE_LIBHYPHEN=ON,- > > > > > > > > > > > > DUSE_LIBHYPHEN=OFF,libhyphen" > > > > > > > > > > > > 67 PACKAGECONFIG[webcrypto] = "- > > > > > > > > > > > > DENABLE_WEB_CRYPTO=ON,- > > > > > > > > > > > > DENABLE_WEB_CRYPTO=OFF,libgcrypt libtasn1" > > > > > > > > > > > > 68 PACKAGECONFIG[gst_gl] = "- > > > > > > > > > > > > DUSE_GSTREAMER_GL=ON,- > > > > > > > > > > > > DUSE_GSTREAMER_GL=OFF,gstreamer1.0-plugins-bad" > > > > > > > > > > > > 69 # Source is at https://github.com/google/wof > > > > > > > > > > > > f2 > > > > > > > > > > > > 70 PACKAGECONFIG[woff2] = "-DUSE_WOFF2=ON,- > > > > > > > > > > > > DUSE_WOFF2=OFF,woff2" > > > > > > > > > > > > 71 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > You need to make sure gst-play-1.0 > > > > > > > > > > > —videosink=glimagesink works on your platform > > > > > > > > > > > before starting to debug webkit. > > > > > > > > > > > After you have validated that works, make sure > > > > > > > > > > > you enabled gst_gl in that packageconfig thing. > > > > > > > > > > > Which GStreamer version do you use? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > At 2018-06-04 16:43:26, "Philippe Normand" <phi > > > > > > > > > > > > [email protected]> wrote: > > > > > > > > > > > > > Hi! > > > > > > > > > > > > > > > > > > > > > > > > > > Which linux distribution do you use? If you > > > > > > > > > > > > > are using the latest Ubuntu (17.04 is the > > > > > > > > > > > > > version I think) or Debian then you need to > > > > > > > > > > > > > install gstreamer1.0-gl. See also https://bug > > > > > > > > > > > > > s.webkit.org/show_bug.cgi?id=184925 > > > > > > > > > > > > > > > > > > > > > > > > > > Philippe > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 1 Jun 2018, at 08:43, tugouxp <138241255 > > > > > > > > > > > > > > [email protected]> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > hi folks: > > > > > > > > > > > > > > i make a test about video player with > > > > > > > > > > > > > > video tag based on midori and webkit2.22.2, > > > > > > > > > > > > > > but seems only when i disable > > > > > > > > > > > > > > "GSTREAMER_GL", the display window can be > > > > > > > > > > > > > > displayed normally. > > > > > > > > > > > > > > if the GSTREAMER_GL was enabled, the > > > > > > > > > > > > > > decoder process working fine but the > > > > > > > > > > > > > > browser cant show the player window, just a > > > > > > > > > > > > > > blank window. > > > > > > > > > > > > > > so,from the code, it seems the difference > > > > > > > > > > > > > > between the two test is the display sinker > > > > > > > > > > > > > > of gstreamer pipe was different. > > > > > > > > > > > > > > 1.if GSTRREAMER_GL enabled, it would be use > > > > > > > > > > > > > > the display sinker "createVideoSinkGL" > > > > > > > > > > > > > > returned > > > > > > > > > > > > > > 2.if GSTRREAMER_GL disabled, the default > > > > > > > > > > > > > > display sinker would be webkit video sink. > > > > > > > > > > > > > > > > > > > > > > > > > > > > seems only method 2 can use, but i found > > > > > > > > > > > > > > another problem when using the way 2(webkit > > > > > > > > > > > > > > videw sinker), that is when playing high > > > > > > > > > > > > > > quality streamer with browser, the > > > > > > > > > > > > > > cpu occupancy rate was very high (about 50 > > > > > > > > > > > > > > percent) of process 'webkitwebprocess'. > > > > > > > > > > > > > > > > > > > > > > > > > > > > so i dont know how to choice, which is the > > > > > > > > > > > > > > better way to deal with this problem, much > > > > > > > > > > > > > > appreciate your help! > > > > > > > > > > > > > > > > > > > > > > > > > > > > codes: > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1108 GstElement* > > > > > > > > > > > > > > MediaPlayerPrivateGStreamerBase::createVide > > > > > > > > > > > > > > oSink() > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1109 { > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1110 > > > > > > > > > > > > > > acceleratedRenderingStateChanged(); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1111 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1112 #if USE(GSTREAMER_GL) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1113 if (m_renderingCanBeAccelerated) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1114 ¦ m_videoSink = > > > > > > > > > > > > > > createVideoSinkGL(); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1115 #endif > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1116 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1117 if (!m_videoSink) { > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1118 ¦ m_usingFallbackVideoSink = > > > > > > > > > > > > > > true; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1119 ¦ m_videoSink = > > > > > > > > > > > > > > webkitVideoSinkNew(); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1120 ¦ > > > > > > > > > > > > > > g_signal_connect_swapped(m_videoSink.get(), > > > > > > > > > > > > > > "repaint-requested", > > > > > > > > > > > > > > G_CALLBACK(repaintCallback), this); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1121 ¦ > > > > > > > > > > > > > > g_signal_connect_swapped(m_videoSink.get(), > > > > > > > > > > > > > > "repaint-cancelled", > > > > > > > > > > > > > > G_CALLBACK(repaintCancelledCallback), > > > > > > > > > > > > > > this); > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1122 } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1123 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1124 GstElement* videoSink = nullptr; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1125 m_fpsSink = > > > > > > > > > > > > > > gst_element_factory_make("fpsdisplaysink", > > > > > > > > > > > > > > "sink"); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1126 if (m_fpsSink) { > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1127 ¦ g_object_set(m_fpsSink.get(), > > > > > > > > > > > > > > "silent", TRUE , nullptr); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1128 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1129 ¦ // Turn off text overlay > > > > > > > > > > > > > > unless logging is enabled. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1130 #if LOG_DISABLED > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1131 ¦ g_object_set(m_fpsSink.get(), > > > > > > > > > > > > > > "text-overlay", FALSE , nullptr); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1132 #else > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1133 ¦ if > > > > > > > > > > > > > > (!isLogChannelEnabled("Media")) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1134 ¦ ¦ > > > > > > > > > > > > > > g_object_set(m_fpsSink.get(), "text- > > > > > > > > > > > > > > overlay", FALSE , nullptr); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1135 #endif // LOG_DISABLED > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1136 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1137 ¦ if > > > > > > > > > > > > > > (g_object_class_find_property(G_OBJECT_GET_ > > > > > > > > > > > > > > CLASS(m_fpsSink.get()), "video-sink")) { > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1138 ¦ ¦ > > > > > > > > > > > > > > g_object_set(m_fpsSink.get(), "video-sink", > > > > > > > > > > > > > > m_videoSink.get(), nullptr); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1139 ¦ ¦ videoSink = > > > > > > > > > > > > > > m_fpsSink.get(); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1140 ¦ } else > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1141 ¦ ¦ m_fpsSink = nullptr; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1142 } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1143 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1144 if (!m_fpsSink) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1145 ¦ videoSink = m_videoSink.get(); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1146 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1147 ASSERT(videoSink); > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1148 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1149 return videoSink; > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ___________________________________________ > > > > > > > > > > > > > > ____ > > > > > > > > > > > > > > webkit-gtk mailing list > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > https://lists.webkit.org/mailman/listinfo/w > > > > > > > > > > > > > > ebkit-gtk > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > <gst.log> > > > > > > > > > > > > _______________________________________________ webkit-gtk mailing list [email protected] https://lists.webkit.org/mailman/listinfo/webkit-gtk
