It has been a while, but I know that I've debugged through safari running a webkit that I built. I may have built using VS2005, though, but I doubt that it makes a difference.
In general, this is all you should have to do: 1) make sure you are attaching to the correct process 2) make sure that process is loading the .dll's that you built 3) make sure that the .pdb (symbol) files for the .dll's that you built are either living with their corresponding .dll's or are otherwise in your symbol path. 4) some breakpoints may not hit in release mode. I'd try debugging a debug build first. Hope this helps, --Aaron Date: Tue, 28 Feb 2012 08:52:11 +0530 From: [email protected] To: [email protected] CC: [email protected] Subject: Re: [webkit-help] can not debug in vs2008 Hi, If you are using Safari as mentioned in the link, using VS2008 you may not hit the break points.Use winlauncher. For that you can set winlauncherlauncher as start up project and try with normal break point procedures. It works for me. -Sravan. On Mon, Feb 27, 2012 at 9:24 PM, tang <[email protected]> wrote: Hi ! I am a newbie of WebKit, finally, I built Webkit with vs2008 sp1.it runs OK, but I can not debug it . the break point is not able to be set. I fellow the instruction in this page: http://www.webkit.org/building/debug.html . Anybody know what is matter? Thanks a lot for your help ! best wishes! tang _______________________________________________ webkit-help mailing list [email protected] http://lists.webkit.org/mailman/listinfo.cgi/webkit-help _______________________________________________ webkit-help mailing list [email protected] http://lists.webkit.org/mailman/listinfo.cgi/webkit-help
_______________________________________________ webkit-help mailing list [email protected] http://lists.webkit.org/mailman/listinfo.cgi/webkit-help
