Hallo,
We have a Mac Os X 10.3 Server which is to have two IP Adresses, one
which will be only accessible internally for connection with a database
server and another one for access via internet.
This is the current Configuration:
Ethernet Integrated has the Ip, which is only internally available (for
the Database)
PCI Ethernet card has the IP, which is to connect to the internet.
This works:
write IP for Internet into webbrowser -> Connect to webserver (we can
see the inde.html of the webserver)
WebObjects wotaskd is started and running
Apache has the configs for WebObjects added
JavaMonitor can be opened
Host can not be configured. We did put the openly available Ip into
monitor for the adaptor URL (and about every other possible Ip, from
127.0.0.1 to the secound IP), but no luck, we can define a host but it
is never available
Test http://IP:1058 -> error message: is reset by host
Questions:
1. Is there anything wrong with the Ip configuration, have both IP's to
come over the PCI card to work properly or has the publicly available
IP to come via Ethernet Integrated (the existing config, with the two
IPs changed over)?
2. Sees anyone something we missed in our configuration? Something we
should check or set to make this work. It did work before the machine
went to the provider. We had WebObjects running and we could access our
Application when started from JavaMonitor (and yes, the host was
available then)
Thanks for some hints on this. I can't see what to do next, probably
something very obvious I'm missing. The firewall cannot be the problem,
can it? WebObjects is allowed there.
Regards
Ute
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Webobjects-deploy mailing list ([email protected])
Help/Unsubscribe/Update your Subscription:
http://lists.apple.com/mailman/options/webobjects-deploy/archive%40mail-archive.com
This email sent to [email protected]
