Thanks! Will take a look. There are lots of NAK’s (NOKs?) during initial scan. So good to know! Thanks!
> On May 13, 2020, at 18:41, Steve Wormley <[email protected]> wrote: > > > The thing is, you didn't really need to do any of that. The channel it found > was accurate for the default channel map so all you needed to do was run: > $GOPATH/bin/rtldavis -tr 1 -tf US -ppm 1 > > And it should start spitting out data after a minute or two. Then update the > weewx.conf with the full path(I don't know if it would understand GOPATH) and > the -ppm 1 set 'transceiver_frequency' to US and it should be happy. > so, roughly: > cmd = /home/myuser/go/bin/rtldavis -ppm 1 > transceiver_frequency = US > iss_channel = 1 > fix rain_bucket_type if appropriate > > > -- > You received this message because you are subscribed to the Google Groups > "weewx-development" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-development/ca68316c-a58d-4b3b-945d-11fb5b1aee8f%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/9DBCCA9B-2584-4653-97C2-0D22FB05BFB3%40gmail.com.
