Just add a field in the database and adapt this persons code to put your well reading in the db
https://gitlab.com/wjcarpenter/bme280wx/-/blob/master/bin/user/bme280wx.py On Tuesday, February 9, 2021 at 10:32:17 AM UTC-8 Oscar Barlow wrote: > I am about to purchase an Eno Scientific Well Watch 760. It has an RS232 > and USB interface and I thought about using weewx to collect that data, > store it in a data base and produce charts. I would have a pi 3 mounted in > existing metal electrical cabinet by the well head. It would be connected > to the device and use WiFi to connect to network. > > > There isn’t a lot of data to store. Time stamp and water level. The unit’s > current settings could be stored with the record. The big issue I see is > that the log interval could change. I may want to log every minute from 7AM > to 10PM and once an hour during off hours. > > > A couple of questions. > > 1. Am I nuts? Yes is an acceptable answer. I may be trying to plow a field > with a sports car. > > 2. I’d need to write a driver and a service. Anything else? > > 3. Suggestions or a different another approach? > > > Sill in the design phase. Waiting to confirm with my well guy he can > install the 760 and electrical for my pi. > > > Thanks, > > Oscar > > > -- You received this message because you are subscribed to the Google Groups "weewx-development" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-development+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-development/94736ef3-ba63-4421-910d-478f8fe9c991n%40googlegroups.com.
