For some reason I get the following values: soilTemp1: None, soilTemp2: 43.0, soilTemp3: None, soilTemp4: None,
so I have only soilTemp2. Is it possible to chnge it by software to the soiilTemp1 or should I go to the garden and change slot for temperature probe? Thanks Tom for clarification. On Saturday, October 29, 2016 at 9:49:27 PM UTC+2, Jacek Skowroński wrote: > > Hi, > I have Davis Vatange pro2 with external leaf_soil module located on ID=2. > So according to help I did such an command > > wee_device --set-transmitter-type=2,8,1,1 > > > So if I understood it correctly I would have temperature and humidity of > soil on the external temp1 and external hum1. > How to get those data to WU? > > Just now on my station we do not see temp and humidity of the soil. > > https://www.wunderground.com/personal-weather-station/dashboard?ID=IWOJEWDZ56 > > Next topic is best timings for sending data, is it possible to get data in > RealTime? > In general Davis has archival for 5min (300sec) so it sends data every > 5minute. > I had tried rapid fire, but it sends data every 2.5 sec but data changes > every 5minute so it's a little bit crazy. > > Is there anybody using Davis Vantage pro2 and WU and could share your > config? > > Thanks in advance > BR > Jacek > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.