I was pretty fed up with the fake-hwclock so I discarded RPi that ran weewx
and began from scratch by installing weewx on a Gigabyte Brix computer.
The Brix has Ubuntu 16.04.3 LTS with all updates installed and on that
computer I installed weewx Standard v3.7.1 (DEB version).
Still I don't get the time correct ... the fake-hwclock can't be an issue
since I have a RTC in the computer.
All time commands give me correct time except weewx (see the attached
image) ... weewx time doesn't change ... it seems to be hard-wired into the
system ...
I have also given the command 'sudo wee_device /etc/weewx/weewx.conf
--set-time'
I have a ntp-server in my network that Brix uses.
Immediately after a reboot 'ntpq -pn' gives following:
remote refid st t when poll reach delay offset
jitter
==============================================================================
192.168.0.1 94.246.113.189 3 u 42 64 1 2.943 -132.26
0.000
What more can I do ?
More info is below:
$ wee-stop.sh; date; wee-vantage-info.sh; wee-start.sh
tor 14 sep 2017 16:11:22 CEST
Using configuration file /etc/weewx/weewx.conf
Using Vantage driver version 3.0.10 (weewx.drivers.vantage)
Querying...
Davis Vantage EEPROM settings:
CONSOLE TYPE: VantageVue
CONSOLE FIRMWARE:
Date: Feb 3 2015
Version: 4.18
CONSOLE SETTINGS:
Archive interval: 300 (seconds)
Altitude: 31 (meter)
Wind cup type: large
Rain bucket type: 0.2 MM
Rain year start: 1
Onboard time: 2017-09-14 16:11:24
CONSOLE DISPLAY UNITS:
Barometer: hPa
Temperature: degree_C
Rain: mm
Wind: meter_per_second
CONSOLE STATION INFO:
Latitude (onboard): +59.2
Longitude (onboard): +18.2
Use manual or auto DST? MANUAL
DST setting: OFF
Use GMT offset or zone code? GMT_OFFSET
Time zone code: N/A
GMT offset: +2.0 hours
TRANSMITTERS:
Channel 1: iss
Channel 2: (N/A)
Channel 3: (N/A)
Channel 4: (N/A)
Channel 5: (N/A)
Channel 6: (N/A)
Channel 7: (N/A)
Channel 8: (N/A)
RECEPTION STATS:
Total packets received: 22709
Total packets missed: 4
Number of resynchronizations: 0
Longest good stretch: 18497
Number of CRC errors: 0
BAROMETER CALIBRATION DATA:
Current barometer reading: 29.114 inHg
Altitude: 102 feet
Dew point: 53 F
Virtual temperature: 54 F
Humidity correction factor: 28
Correction ratio: 1.004
Correction constant: +0.000 inHg
Gain: 0.000
Offset: -9.000
OFFSETS:
Wind direction: +0 deg
Inside Temperature: +0.0 F
Inside Humidity: +0%
Outside Temperature: +0.0 F
Outside Humidity: +0%
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
