Hello Thomas!!! I see you are using an Ambient 2902 as I. I can not for the life of me get my 2902 to work with weewx. Is there a tread where I can find detailed info on getting this ws-2902 to work off the console or any method?
I get the same on my -tail -f /var/log/syslog as kan6526 above. Andy On Thursday, May 25, 2017 at 10:20:07 PM UTC-5, Thomas Keffer wrote: > > In addition to Gary's suggestions, I would add one more: your disk may be > failing. > > -tk > > On Thu, May 25, 2017 at 4:20 PM, gjr80 <gjrod...@gmail.com <javascript:>> > wrote: > >> Hi, >> >> This is likely why you are seeing the error message: >> >> May 25 23:37:01 GA-8IEXRR weewx[7366]: cheetahgenerator: Generated 14 >>> files for report StandardReport in 1038.33 seconds >>> >> >> 1038 seconds is roughly 17 minutes. I don't know what your archive >> interval is but if it is anything less than 20 minutes this would cause >> problems. The report cycle is triggered at the end of an archive period and >> each report cycle is run in its own thread. If a new report thread is >> created before the old one is complete then you will run into the sort of >> errors you see above - ie files the old thread is expecting to use no >> longer exist because the new report thread has taken over. If this is a >> one-off situation things will come good after an archive period or 2, but >> if it is an ongoing problem your report threads will not generate (some or >> all) reports and what you will see are your pages not being updated. >> >> A few things to look at: >> 1. What is your archive period? You should see it mentioned explicitly in >> the log when weeWX starts. If its less than 5 minutes then it is possible >> you are asking weeWX to do too much (ie generate too many or too complex >> reports). >> 2. What skins are you running? Just the Standard skin or some others? If >> your PC cannot generate all of the reports in each skin within an archive >> period you will experience the problem you describe. >> 3. Is the error you posted above happening regularly, ie every archive >> period, or just now and then. If now and then it may be a case of something >> else loading your PC causing weeWX to be unable to complete reports in a >> timely manner. If it's occurring regularly then you may be 'overloading' >> weeWX. >> >> Gary >> >> On Friday, 26 May 2017 01:45:26 UTC+10, kan6526 wrote: >>> >>> >>> WeeWX generates HTML pages, but it does not update them >>> >>> >>> -----------stop weewx >>> >>> msg-------------------------------------------------------------------------------- >>> weewx[7366]: interceptor: MainThread: unrecognized parameter >>> absbaromin=29.78 >>> >>> May 25 23:37:01 GA-8IEXRR weewx[7366]: **** File >>> "/usr/share/weewx/weewx/cheetahgenerator.py", line 330, in generate >>> May 25 23:37:01 GA-8IEXRR weewx[7366]: **** os.rename(tmpname, >>> _fullname) >>> May 25 23:37:01 GA-8IEXRR weewx[7366]: **** OSError: [Errno 2] 沒有此一檔案或目錄 >>> May 25 23:37:01 GA-8IEXRR weewx[7366]: cheetahgenerator: Generated 14 >>> files for report StandardReport in 1038.33 seconds >>> May 25 23:37:01 GA-8IEXRR weewx[7366]: **** Traceback (most recent call >>> last): >>> May 25 23:37:01 GA-8IEXRR weewx[7366]: **** File >>> "/usr/share/weewx/weewx/cheetahgenerator.py", line 330, in generate >>> May 25 23:37:01 GA-8IEXRR weewx[7366]: **** os.rename(tmpname, >>> _fullname) >>> May 25 23:37:01 GA-8IEXRR weewx[7366]: **** OSError: [Errno 2] 沒有此一檔案或目錄 >>> May 25 23:37:01 GA-8IEXRR weewx[7366]: cheetahgenerator: Generated 7 >>> files for report StandardReport in 270.15 seconds >>> May 25 23:37:03 GA-8IEXRR weewx[7366]: imagegenerator: Generated 12 >>> images for StandardReport in 1.29 seconds >>> May 25 23:37:03 GA-8IEXRR weewx[7366]: copygenerator: copied 0 files to >>> /var/www/weewx >>> May 25 23:37:03 GA-8IEXRR weewx[7366]: imagegenerator: Generated 12 >>> images for StandardReport in 1.30 seconds >>> May 25 23:37:03 GA-8IEXRR weewx[7366]: copygenerator: copied 9 files to >>> /var/www/weewx >>> >>> ----------------------weewx start msg ---------------------------------- >>> May 25 23:43:35 GA-8IEXRR weewx[7638]: engine: Initializing weewx >>> version 3.7.1 >>> May 25 23:43:35 GA-8IEXRR weewx[7638]: engine: Using Python 2.6.6 >>> (r266:84292, Dec 27 2010, 00:02:40) #012[GCC 4.4.5] >>> May 25 23:43:35 GA-8IEXRR weewx[7638]: engine: Platform >>> Linux-2.6.32-5-686-i686-with-debian-6.0.10 >>> May 25 23:43:35 GA-8IEXRR weewx[7638]: engine: Locale is 'zh_TW.UTF-8' >>> May 25 23:43:35 GA-8IEXRR weewx[7638]: engine: pid file is >>> /var/run/weewx.pid >>> May 25 23:43:35 GA-8IEXRR weewx[7643]: engine: Using configuration file >>> /etc/weewx/weewx.conf >>> May 25 23:43:35 GA-8IEXRR weewx[7643]: engine: Loading station type >>> Interceptor (user.interceptor) >>> May 25 23:43:35 GA-8IEXRR weewx[7643]: interceptor: MainThread: driver >>> version is 0.30 >>> May 25 23:43:35 GA-8IEXRR weewx[7643]: interceptor: MainThread: device >>> type: observer >>> May 25 23:43:35 GA-8IEXRR weewx[7643]: interceptor: MainThread: sensor >>> map: None >>> May 25 23:43:35 GA-8IEXRR weewx[7643]: interceptor: MainThread: mode is >>> sniff >>> May 25 23:43:35 GA-8IEXRR weewx[7643]: interceptor: MainThread: sniff >>> iface=eth1 promiscuous=0 >>> May 25 23:43:35 GA-8IEXRR weewx[7643]: interceptor: MainThread: sniff >>> filter 'src 192.168.2.224 and dst port 80' >>> May 25 23:43:35 GA-8IEXRR weewx[7643]: engine: StdConvert target unit is >>> 0x1 >>> >>> >>>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
