Just did a brand new install - smooth as butter with no errors that I can see.
Pat, can you explain the temp records below for largest and smallest daily temp range? Using simulator but I would have thought those temps would be in the highest temp above if they were real data? Highest Temperature 0.4 °C August 24, 2018 at 4:09 PM August 24, 2018 at 4:09 PM 0.4 °C Lowest Temperature 0.2 °C August 24, 2018 at 4:24 PM August 24, 2018 at 4:24 PM 0.2 °C Highest Heat Index 0.4 °C August 24, 2018 at 4:09 PM August 24, 2018 at 4:09 PM 0.4 °C Lowest Wind Chill 0.2 °C August 24, 2018 at 4:24 PM August 24, 2018 at 4:24 PM 0.2 °C Largest Daily Temperature Range 0.3 °C August 24, 2018 (Min: 32.4 °C - Max: 32.7 °C ) August 24, 2018 (Min: 32.4 °C - Max: 32.7 °C ) 0.3 °C Smallest Daily Temperature Range 0.3 °C August 24, 2018 (Min: 32.4 °C - Max: 32.7 °C ) August 24, 2018 (Min: 32.4 °C - Max: 32.7 °C ) 0.3 °C On Fri, Aug 24, 2018 at 1:19 PM Pat <p...@obrienphoto.net> wrote: > Strange. Can't pinpoint it. You're both on a Pi, let me get a Pi setup and > see if I can figure it out. > > @gjr80, have you seen this before with your highcharts extension? > > On Thursday, August 23, 2018 at 8:01:18 PM UTC-4, steep...@gmail.com > wrote: >> >> I am getting a similar problem Juan Antonio >> >> Aug 24 00:51:48 wxnuc weewx[10832]: **** default_binding) >> Aug 24 00:51:48 wxnuc weewx[10832]: **** File >> "/usr/share/weewx/weewx/cheetahgenerator.py", line 372, in _getSearchList >> Aug 24 00:51:48 wxnuc weewx[10832]: **** searchList += >> obj.get_extension_list(timespan, db_lookup) >> Aug 24 00:51:48 wxnuc weewx[10832]: **** File >> "/usr/share/weewx/user/belchertown_highchartsSearchX.py", line 88, in >> get_extension_list >> Aug 24 00:51:48 wxnuc weewx[10832]: **** (time_start_vt, >> time_stop_vt, outTemp_vt) = db_lookup().getSqlVectors(TimeSpan(_start_ts, >> timespan.stop), 'outTemp') >> Aug 24 00:51:48 wxnuc weewx[10832]: **** File >> "/usr/share/weewx/weeutil/weeutil.py", line 315, in __new__ >> Aug 24 00:51:48 wxnuc weewx[10832]: **** raise >> ValueError("start time (%d) is greater than stop time (%d)" % (args[0], >> args[1])) >> Aug 24 00:51:48 wxnuc weewx[10832]: **** ValueError: start time >> (1535065200) is greater than stop time (1483228800) >> Aug 24 00:51:48 wxnuc weewx[10832]: **** Generator terminated >> Aug 24 00:51:48 wxnuc weewx[10832]: copygenerator: copied 22 files to >> /var/www/html/weewx/belchertown >> I have tried it both on an existing WeeWX installation and a clean install. >> Rig is a RaspberyPi 3+ with Debian Stretch installed. >> >> >> >> On Thursday, August 23, 2018 at 4:47:55 PM UTC+1, Juan Antonio Mosquera >> wrote: >>> >>> Hello, >>> >>> >>> I have a problem generating... >>> >>> >>> Aug 23 17:45:25 meteomontaos weewx[12818]: reportengine: Caught >>> unrecoverable exception in generator weewx.cheetahgenerator.CheetahGenerator >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** start time (1534975200) >>> is greater than stop time (1420066800) >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** Traceback (most recent >>> call last): >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** File >>> "/usr/share/weewx/weewx/reportengine.py", line 239, in run >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** obj.start() >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** File >>> "/usr/share/weewx/weewx/reportengine.py", line 273, in start >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** self.run() >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** File >>> "/usr/share/weewx/weewx/cheetahgenerator.py", line 158, in run >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** ngen = >>> self.generate(gen_dict[section_name], self.gen_ts) >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** File >>> "/usr/share/weewx/weewx/cheetahgenerator.py", line 232, in generate >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** ngen += >>> self.generate(section[subsection], gen_ts) >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** File >>> "/usr/share/weewx/weewx/cheetahgenerator.py", line 232, in generate >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** ngen += >>> self.generate(section[subsection], gen_ts) >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** File >>> "/usr/share/weewx/weewx/cheetahgenerator.py", line 320, in generate >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** default_binding) >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** File >>> "/usr/share/weewx/weewx/cheetahgenerator.py", line 372, in _getSearchList >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** searchList += >>> obj.get_extension_list(timespan, db_lookup) >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** File >>> "/usr/share/weewx/user/belchertown_highchartsSearchX.py", line 88, in >>> get_extension_list >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** (time_start_vt, >>> time_stop_vt, outTemp_vt) = db_lookup().getSqlVectors(TimeSpan(_start_ts, >>> timespan.stop), 'outTemp') >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** File >>> "/usr/share/weewx/weeutil/weeutil.py", line 315, in __new__ >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** raise >>> ValueError("start time (%d) is greater than stop time (%d)" % (args[0], >>> args[1])) >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** ValueError: start time >>> (1534975200) is greater than stop time (1420066800) >>> Aug 23 17:45:25 meteomontaos weewx[12818]: **** Generator terminated >>> >>> >>> I use weewx in Raspberry (raspbian) >>> >>> >>> Thanks. >>> >>> El martes, 21 de agosto de 2018, 20:45:13 (UTC+2), Pat escribió: >>>> >>>> The Belchertown skin for weewx is now available. This skin is modeled >>>> after https://belchertownweather.com >>>> >>>> The skin features >>>> >>>> - Real time streaming updates on the front page without needing to >>>> reload the site (weewx-mqtt extension required) >>>> - Forecast data updated every hour without needing to reload (a >>>> free DarkSky API key required) >>>> - Information on your closest Earthquake updated automatically >>>> every 3 hours >>>> - Weather station observation graphs which update without needing >>>> to reload >>>> - Weather records for the current year, and for all time >>>> - A mobile and iPad ready display. You could use an iPad as a "2nd >>>> console". >>>> >>>> There are dozens of options to configure within the skin. Please view >>>> the readme on GitHub <https://github.com/poblabs/weewx-belchertown> for >>>> a detailed explanation. >>>> >>>> The GitHub page: https://github.com/poblabs/weewx-belchertown >>>> >>>> Direct download of v0.1: >>>> https://github.com/poblabs/weewx-belchertown/archive/weewx-belchertown-0.1.tar.gz >>>> >>>> Quick install: >>>> >>>> wget https:// >>>> github.com/poblabs/weewx-belchertown/archive/weewx-belchertown-0.1.tar.gz >>>> >>>> sudo wee_extension --install weewx-belchertown-0.1.tar.gz >>>> >>>> Configure weewx.conf with your options >>>> >>>> Restart weewx >>>> >>>> Out of the box, it is a very basic theme. Make sure to check out the readme >>>> for all options available >>>> <https://github.com/poblabs/weewx-belchertown>! >>>> >>>> >>>> This is my first skin, and I've done all I could to test it out in >>>> various environments to iron out any initial bugs. If you do find something >>>> that's a little off, or room for improvement, please let me know! >>>> >>>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.