have you tried clearing the memory by power cycling the station - remove all power - batteries and usb - and start the station again
On Friday, 24 August 2018 19:39:31 UTC+3, Adam Sjøgren wrote: > > mwall writes: > > > On Thursday, August 23, 2018 at 2:56:23 PM UTC-4, Adam Sjøgren wrote: > > >> Configuring weewx to get information from --current instead the history > >> would be easier [for me, anyway :-)]. Is it possible, and if so, how? > > > first try clearing the station memory - it looks like you might have > > corrupt data in the logger (you could use wee_device to dump the logger > > memory if you really want to go deep) > > I should have mentioned that I had also tried that (using "sudo wee_device > --clear-memory"), besides the other things. > > > also, be sure that your configuration is set to record_generation = > > software > > It wasn't, but flipping it to "software" made no discernable difference > to the end result. > > > if all else fails, you can make weewx think that your driver does not > > support reading of historical records by changing the name of > > genArchiveRecords to xgenArchiveRecords (line 1096 in the file > fousb.py). > > I tried this as well (and restarting weewx afterwards), but still no > updates. > > > finally, beware that the fine offset 10x0/20x0/30x0 stations are very > > sensitive to voltage fluctuations on the usb. sometimes you will see > the > > station randomly reset itself to factory defaults (resulting in an > archive > > interval of 30 minutes). worst case you suffer the usb lockups, which > can > > only be resolved by power cycling the station. > > I haven't seen any of those symptoms, but I have ordered a new cable to > give it a last go before I ditch the station and try the RTL-SDR way. > > Funnily wee_device --current still works a charm, so for my usecase it > would be fine if I could funnel that information into weewx. > > > Thanks for the answer! > > Adam > > -- > "En pessimist i sitt livs form" Adam Sjøgren > > as...@koldfront.dk <javascript:> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.