Juan Antonio: Prueba un skin "normal" a ver que resultado tienes. Yo no he observado eso.
El miércoles, 26 de septiembre de 2018, 21:33:51 (UTC+2), Juan Antonio Mosquera escribió: > > I have detected a problem that I do not know if it is the driver or the > skin (Belchertown). There are spaces in time that I do not have wind data, > it can be seen in the capture that I attach. > > [image: Captura de pantalla de 2018-09-26 21-32-23.png] > > > Thank you. > > El lunes, 24 de septiembre de 2018, 3:03:37 (UTC+2), Cameron D escribió: >> >> I have attached an updated WMR300 driver, based on v19rc6 from v3.8.2 >> >> The history clear has been reinstated, and an issue with the console >> stopping data transmission has been fixed. >> This is done simply by identifying when no data has been received for a >> minute and issuing an instruction to restart sending data. >> >> To install: >> Either: >> * A.* you could rename it and overwrite the wmr300.py file in >> weewx/drivers (having first made a backup) >> or >> *B*. (safer) >> 1. copy the file into the "user" folder of the installation folder. >> 2. edit the weewx.conf file to point to the new driver: in the [WMR300] >> section, change >> "driver = weewx.drivers.wmr300" >> to "driver = user.wmr300-v19rc6+fix" >> >> >> the driver has extra options that you can enable if necessary: >> debug_history = 1 >> debug_timing = 1 >> >> This code has been working continuously under weewx 3.8.0 for 6 months >> with no hangs and many instances where it needed to restart the console. >> I have a 1 minute history interval and clear at 6%, which means the >> history clear runs approx every 32 hours. >> >> Cameron >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.