Ok.. So it seems like this part resets the settings made at the top of the wmr200.py file. If DEBUG is needed then one needs to set "1" here too..
* # Restart counter when driver crashes and is restarted by the # weewx engine. global STAT_RESTART STAT_RESTART += 1 if STAT_RESTART > 1: logwar(('Restart count: %d') % STAT_RESTART) # Reset any other state during startup or after a crash. PacketArchiveData.rain_total_last = None # Debugging flags global DEBUG_WRITES DEBUG_WRITES = int(stn_dict.get('debug_writes', 0)) global DEBUG_COMM DEBUG_COMM = int(stn_dict.get('debug_comm', 0)) global DEBUG_CONFIG_DATA DEBUG_CONFIG_DATA = int(stn_dict.get('debug_config_data', 1)) global DEBUG_PACKETS_RAW DEBUG_PACKETS_RAW = int(stn_dict.get('debug_packets_raw', 1)) global DEBUG_PACKETS_COOKED DEBUG_PACKETS_COOKED = int(stn_dict.get('debug_packets_cooked', 0)) global DEBUG_PACKETS_ARCHIVE DEBUG_PACKETS_ARCHIVE = int(stn_dict.get('debug_packets_archive', 0)) global DEBUG_PACKETS_TEMP DEBUG_PACKETS_TEMP = int(stn_dict.get('debug_packets_temp', 0)) global DEBUG_PACKETS_RAIN DEBUG_PACKETS_RAIN = int(stn_dict.get('debug_packets_rain', 0)) global DEBUG_PACKETS_WIND DEBUG_PACKETS_WIND = int(stn_dict.get('debug_packets_wind', 0)) global DEBUG_PACKETS_STATUS DEBUG_PACKETS_STATUS = int(stn_dict.get('debug_packets_status', 0)) global DEBUG_PACKETS_PRESSURE DEBUG_PACKETS_PRESSURE = int(stn_dict.get('debug_packets_pressure', 0)) global DEBUG_CHECKSUM DEBUG_CHECKSUM = int(stn_dict.get('debug_checksum', 0)) global DEBUG_MAPPING DEBUG_MAPPING = int(stn_dict.get('debug_mapping', 0))* -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.