Alright, so I added windGustDir = wind_gust_dir to the sensor_map stanza,
but I am still getting the same message in my syslog. Any ideas?
On Thursday, December 6, 2018 at 10:58:47 AM UTC-6, Alan Bryant wrote:
>
> Ok, so apparently I did not read everything on the Github readme for the
> interceptor extension. I ran it manually with debug and this is what I am
> seeing:
>
> raw packet: {'wind_speed': 9.0, 'barometer': 30.18, 'wind_gust': 11.0,
> 'dewpoint': 63.5, 'humidity_out': 81.0, 'rain': 0.0, 'dateTime':
> 1544115304, 'temperature_out': 69.6, 'wind_dir': 113.0, 'rain_total': 0.0,
> 'usUnits': 1}
> mapped packet: {'barometer': 30.18, 'dewpoint': 63.5, 'outHumidity': 81.0,
> 'rain': 0.0, 'dateTime': 1544115304, 'windDir': 113.0, 'outTemp': 69.6,
> 'windSpeed': 9.0, 'windGust': 11.0, 'usUnits': 1}
> identifiers: {}
> raw data:
> ID=KTXTAFT8&PASSWORD=4wqrc4c0&softwaretype=myAcuRite&dateutc=now&action=updateraw&realtime=1&rtfreq=36&action=updateraw&realtime=1&rtfreq=35&baromin=30.18&humidity=81&tempf=69.6&windspeedmph=12&winddir=135&windgustmph=12&windgustdir=135&dewptf=63.5&dailyrainin=0.00&rainin=0.00
>
> HTTP/1.1
> Host:www.wunderground.com
> Content-Type:application/x-www-form-urlencoded
> Content-Length:0
> Connection:close
> User-Agent: Atlas/047
>
> So it looks like I mapped most things wrong in the sensor_maps. How would
> I go about mapping the windgustdir correctly? I did not see it in the debug
> output. If it follows the convention of the others, I am assuming it would
> b wind_gust_dir, would that be correct? Since it seems to be mapping the
> others, would this be the only one I would need to put in the sensor_map
> stanza?
>
> Thank you for any help!
>
> On Thursday, December 6, 2018 at 10:14:40 AM UTC-6, Alan Bryant wrote:
>>
>> I have an Acurite 5n1 with a base station and Access hub. I do not have a
>> computer near where the station is, so I'm using Interceptor to sniff the
>> traffic from the Access to WU. I've got weewx up and running and installed
>> the Interceptor extension and it seems to be detecting the data sent to WU.
>> Thanks Matthew! I'm getting a message in syslog that seems to be telling me
>> that it cannot understand the windgustdir parameter that my Access is
>> sending to WU. I did map it to windGustDir in weewx.conf.
>>
>> Here is the relevant line from syslog:
>>
>> Dec 6 10:11:01 jakku weewx[8952]: interceptor: MainThread: unrecognized
>> parameter windgustdir=113
>>
>> The message repeats quite a lot and the only thing changes is the
>> direction.
>>
>> Here is my Interceptor config from weewx.conf:
>>
>> [Interceptor]
>> # This section is for the network traffic interceptor driver.
>>
>> # The driver to use:
>> driver = user.interceptor
>>
>> # Specify the hardware device to capture. Options include:
>> # acurite-bridge - acurite internet bridge
>> # observer - fine offset WH2600/HP1000/HP1003, aka 'observer'
>> # lw30x - oregon scientific LW301/LW302
>> # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
>> device_type = observer
>> mode = sniff
>> iface = eth1
>> pcap_filter = src 192.168.1.240 and dst port 80
>>
>> [[sensor_map]]
>> barometer = baromin
>> outHumidity = humidity
>> outTemp = tempf
>> windSpeed = windspeedmph
>> windDir = winddir
>> windGust = windgustmph
>> windGustDir = windgustdir
>> dewpoint = dewpointf
>> rain = rainin
>>
>>
>> Here is what the access is sending to WU according to a tcpdump capture:
>>
>> 10:13:29.780975 IP 192.168.1.240.18347 >
>> a23-67-156-86.deploy.static.akamaitechnologies.com.http: Flags [P.], seq
>> 1:470, ack 1, win 8192, length 469: HTTP: GET
>> /weatherstation/updateweatherstation.php?ID=KTXTAFT8&PASSWORD=4wqrc4c0&softwaretype=myAcuRite&dateutc=now&action=updateraw&realtime=1&rtfreq=36&action=updateraw&realtime=1&rtfreq=35&baromin=30.18&humidity=79&tempf=69.8&windspeedmph=10&winddir=135&windgustmph=10&windgustdir=135&dewptf=63.0&dailyrainin=0.00&rainin=0.00
>>
>> HTTP/1.1
>>
>> I believe I have everything configured correctly. Where else can I look
>> to figure this out?
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
