I went back to a previous conf file and loaded it and things are now working again. It is interesting that I tried this before with no luck. I found out, for some reason, I needed to reboot weewx vs just restarting after replacing the conf file, for it to work.
Tom On Wednesday, December 19, 2018 at 12:18:15 PM UTC-6, nine...@gmail.com wrote: > > Well I have somehow managed to change something that is causing my system > not to work. It was working fine. I imported several years worth of > record from Weather Underground. > > I get this message: > > weewx[481]: engine: Caught unrecoverable exception in engine: > Dec 19 11:50:37 weewx weewx[481]: **** 'windSpeed' > Dec 19 11:50:37 weewx weewx[481]: **** Traceback (most recent call > last): > Dec 19 11:50:37 weewx weewx[481]: **** File > "/usr/share/weewx/weewx/engine.py", line 877, in main > Dec 19 11:50:37 weewx weewx[481]: **** engine.run() > Dec 19 11:50:37 weewx weewx[481]: **** File > "/usr/share/weewx/weewx/engine.py", line 160, in run > Dec 19 11:50:37 weewx weewx[481]: **** > self.dispatchEvent(weewx.Event(weewx.STARTUP)) > Dec 19 11:50:37 weewx weewx[481]: **** File > "/usr/share/weewx/weewx/engine.py", line 224, in dispatchEvent > Dec 19 11:50:37 weewx weewx[481]: **** callback(event) > Dec 19 11:50:37 weewx weewx[481]: **** File > "/usr/share/weewx/weewx/engine.py", line 509, in startup > Dec 19 11:50:37 weewx weewx[481]: **** > self._catchup(self.engine.console.genStartupRecords) > Dec 19 11:50:37 weewx weewx[481]: **** File > "/usr/share/weewx/weewx/engine.py", line 623, in _catchup > Dec 19 11:50:37 weewx weewx[481]: **** origin='hardware')) > Dec 19 11:50:37 weewx weewx[481]: **** File > "/usr/share/weewx/weewx/engine.py", line 224, in dispatchEvent > Dec 19 11:50:37 weewx weewx[481]: **** callback(event) > Dec 19 11:50:37 weewx weewx[481]: **** File > "/usr/share/weewx/user/weewxwd3.py", line 177, in new_archive_record > Dec 19 11:50:37 weewx weewx[481]: **** data_metricwx['windSpeed']) > Dec 19 11:50:37 weewx weewx[481]: **** KeyError: 'windSpeed' > > Here is my config file: > # WEEWX CONFIGURATION FILE > # > # Copyright (c) 2009-2015 Tom Keffer <tkef...@gmail.com> > # See the file LICENSE.txt for your rights. > > > ############################################################################## > > # This section is for general configuration information. > > # Set to 1 for extra debug info, otherwise comment it out or set to zero > debug = 0 > > # Root directory of the weewx data file hierarchy for this station > WEEWX_ROOT = / > > # How long to wait before timing out a socket (FTP, HTTP) connection > socket_timeout = 20 > > # Do not modify this. It is used when installing and updating weewx. > version = 3.8.2 > > > ############################################################################## > > # This section is for information about the station. > > [Station] > > # Description of the station location > location = "Albertville, AL" > > # Latitude and longitude in decimal degrees > latitude = 34.244 > longitude = -86.235 > > # Altitude of the station, with unit it is in. This is downloaded from > # from the station if the hardware supports it. > altitude = 322, meter > > # Set to type of station hardware. There must be a corresponding stanza > # in this file with a 'driver' parameter indicating the driver to be > used. > station_type = Vantage > > # If you have a website, you may specify an URL > #station_url = http://www.example.com > > # The start of the rain year (1=January; 10=October, etc.). This is > # downloaded from the station if the hardware supports it. > rain_year_start = 1 > > # Start of week (0=Monday, 6=Sunday) > week_start = 6 > > > ############################################################################## > > [Vantage] > # This section is for the Davis Vantage series of weather stations. > > # Connection type: serial or ethernet > # serial (the classic VantagePro) > # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) > type = serial > > # If the connection type is serial, a port must be specified: > # Debian, Ubuntu, Redhat, Fedora, and SuSE: > # /dev/ttyUSB0 is a common USB port name > # /dev/ttyS0 is a common serial port name > # BSD: > # /dev/cuaU0 is a common serial port name > port = /dev/ttyUSB0 > > # If the connection type is ethernet, an IP Address/hostname is > required: > host = 1.2.3.4 > > ###################################################### > # The rest of this section rarely needs any attention. > # You can safely leave it "as is." > ###################################################### > > # Serial baud rate (usually 19200) > baudrate = 19200 > > # TCP port (when using the WeatherLinkIP) > tcp_port = 22222 > > # TCP send delay (when using the WeatherLinkIP): > tcp_send_delay = 0.5 > > # The id of your ISS station (usually 1). If you use a wind meter > connected > # to a anemometer transmitter kit, use its id > iss_id = 1 > > # How long to wait for a response from the station before giving up (in > # seconds; must be greater than 2) > timeout = 4 > > # How long to wait before trying again (in seconds) > wait_before_retry = 1.2 > > # How many times to try before giving up: > max_tries = 4 > > # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 > model_type = 2 > > # The driver to use: > driver = weewx.drivers.vantage > > > ############################################################################## > > # This section is for uploading data to Internet sites > > [StdRESTful] > > [[StationRegistry]] > # To register this weather station with weewx, set this to true > register_this_station = false > > [[AWEKAS]] > # This section is for configuring posts to AWEKAS. > > # If you wish to do this, set the option 'enable' to true, > # and specify a username and password. > # To guard against parsing errors, put the password in quotes. > enable = false > username = replace_me > password = replace_me > > [[CWOP]] > # This section is for configuring posts to CWOP. > > # If you wish to do this, set the option 'enable' to true, > # and specify the station ID (e.g., CW1234). > enable = true > station = ***** > > # If this is an APRS (radio amateur) station, uncomment > # the following and replace with a passcode (e.g., 12345). > passcode = ***** > > [[PWSweather]] > # This section is for configuring posts to PWSweather.com. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station and password. > # To guard against parsing errors, put the password in quotes. > enable = false > station = replace_me > password = replace_me > > [[WOW]] > # This section is for configuring posts to WOW. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station and password. > # To guard against parsing errors, put the password in quotes. > enable = false > station = replace_me > password = replace_me > > [[Wunderground]] > # This section is for configuring posts to the Weather Underground. > > # If you wish to do this, set the option 'enable' to true, > # and specify a station (e.g., 'KORHOODR3') and password. > # To guard against parsing errors, put the password in quotes. > enable = true > station = KALALBER13 > password = ******** > > > # Set the following to True to have weewx use the WU "Rapidfire" > # protocol. Not all hardware can support it. See the User's Guide. > rapidfire = true > [[Meteotemplate]] > password = ******** > server_url = ********* > > > ############################################################################## > > # This section specifies what reports, using which skins, to generate. > > [StdReport] > > # Where the skins reside, relative to WEEWX_ROOT > SKIN_ROOT = /etc/weewx/skins > > # Where the generated reports should go, relative to WEEWX_ROOT > HTML_ROOT = /var/www/html/weewx > > # The database binding indicates which data should be used in reports. > data_binding = wx_binding > > # Each of the following subsections defines a report that will be run. > > [[StandardReport]] > # See the customizing guide to change the units, plot types and > line > # colors, modify the fonts, display additional sensor data, and > other > # customizations. Many of those changes can be made here by > overriding > # parameters, or by modifying templates within the skin itself. > > # The StandardReport uses the 'Standard' skin, which contains the > # images, templates and plots for the report. > skin = Standard > [[[Units]]] > [[[[Groups]]]] > group_altitude = foot > group_speed2 = mile_per_hour2 > group_pressure = inHg > group_rain = inch > group_rainrate = inch_per_hour > group_temperature = degree_F > group_degree_day = degree_F_day > group_speed = mile_per_hour > [[wdTesttags]] > #HTML_ROOT = /var/www/html/weewx/WD > skin = Testtags > [[[Units]]] > [[[[TimeFormats]]]] > date_time_f = %d/%m/%Y %H:%M > date_f = %d/%m/%Y > [[[[Groups]]]] > group_altitude = foot > group_speed2 = mile_per_hour2 > group_pressure = inHg > group_rain = inch > group_rainrate = inch_per_hour > group_temperature = degree_F > group_degree_day = degree_F_day > group_speed = mile_per_hour > [[wdPWS]] > #HTML_ROOT = /var/www/html/weewx/WD > skin = PWS > [[[Units]]] > [[[[Groups]]]] > group_speed2 = mile_per_hour2 > group_pressure = inHg > group_rain = inch > group_rainrate = inch_per_hour > group_temperature = degree_F > group_degree_day = degree_F_day > group_speed = mile_per_hour > [[wdClientraw]] > #HTML_ROOT = /var/www/html/weewx/WD > skin = Clientraw > [[wdStackedWindRose]] > #HTML_ROOT = /var/www/html/weewx/WD > skin = StackedWindRose > [[[Units]]] > [[[[TimeFormats]]]] > date_time_f = %d/%m/%Y %H:%M > date_f = %d/%m/%Y > [[[[Groups]]]] > group_speed2 = mile_per_hour2 > group_speed = mile_per_hour > [[wdSteelGauges]] > #HTML_ROOT = /var/www/html/weewx/WD > skin = SteelGauges > [[[Units]]] > [[[[Groups]]]] > group_speed2 = mile_per_hour2 > group_pressure = inHg > group_rain = inch > group_rainrate = inch_per_hour > group_temperature = degree_F > group_degree_day = degree_F_day > group_speed = mile_per_hour > > [[FTP]] > # FTP'ing the results to a webserver is treated as just another > report, > # albeit one with an unusual report generator! > skin = Ftp > > # If you wish to use FTP, uncomment and fill out the next four > lines. > # Use quotes around passwords to guard against parsing errors. > user = ********* > password = ****** > server = ******** > path =********* > > # Set to True for an FTP over TLS (FTPS) connection. Not all > servers > # support this. > secure_ftp = False > > # To upload files from something other than what HTML_ROOT is set > # to above, specify a different HTML_ROOT here. > #HTML_ROOT = /var/www/html/weewx > > # Most FTP servers use port 21 > port = 21 > > # Set to 1 to use passive mode, zero for active mode > passive = 1 > > [[RSYNC]] > # rsync'ing to a webserver is treated as just another report > skin = Rsync > > # If you wish to use rsync, you must configure passwordless ssh > using > # public/private key authentication from the user account that > weewx > # runs as to the user account on the remote machine where the files > # will be copied. > # > # The server, user, and path determine where files will be sent. > # The server is the server name, such as www.threefools.org > # The user is the username, such as weewx > # The path is the destination directory, such as > /var/www/html/weather > # Be sure that the user has write permissions on the destination! > #server = replace_me > #user = replace_me > #path = replace_me > > # Rsync can be configured to remove files from the remote server if > # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if > you > # make a mistake in the remote path, you could could > unintentionally > # cause unrelated files to be deleted. Set to 1 to enable remote > file > # deletion, zero to allow files to accumulate remotely. > delete = 0 > > > ############################################################################## > > # This service acts as a filter, converting the unit system coming from > # the hardware to a unit system in the database. > > [StdConvert] > > # The target_unit affects only the unit system in the database. Once > # chosen it cannot be changed without converting the entire database. > # Modification of target_unit after starting weewx will result in > # corrupt data - the database will contain a mix of US and METRIC data. > # > # The value of target_unit does not affect the unit system for > # reporting - reports can display US, Metric, or any combination of > units. > # > # In most cases, target_unit should be left as the default: US > # > # In particular, those migrating from a standard wview installation > # should use US since that is what the wview database contains. > > # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! > target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' > > > ############################################################################## > > # This section can adjust data using calibration expressions. > > [StdCalibrate] > > [[Corrections]] > # For each type, an arbitrary calibration expression can be given. > # It should be in the units defined in the StdConvert section. > # Example: > foo = foo + 0.2 > > > ############################################################################## > > # This section is for quality control checks. If units are not specified, > # values must be in the units defined in the StdConvert section. > > [StdQC] > > [[MinMax]] > barometer = 26, 32.5, inHg > outTemp = -40, 120, degree_F > inTemp = 10, 120, degree_F > outHumidity = 0, 100 > inHumidity = 0, 100 > windSpeed = 0, 120, mile_per_hour > pressure = 24, 34.5, inHg > > > ############################################################################## > > # This section controls the origin of derived values. > > [StdWXCalculate] > > [[Calculations]] > # Derived quantities are calculated by this service. Possible > values are: > # hardware - use the value provided by hardware > # software - use the value calculated by weewx > # prefer_hardware - use value provide by hardware if available, > # otherwise use value calculated by weewx > > pressure = prefer_hardware > barometer = prefer_hardware > altimeter = prefer_hardware > windchill = prefer_hardware > heatindex = prefer_hardware > dewpoint = prefer_hardware > inDewpoint = prefer_hardware > rainRate = prefer_hardware > > > ############################################################################## > > # For hardware that supports it, this section controls how often the > # onboard clock gets updated. > > [StdTimeSynch] > > # How often to check the weather station clock for drift (in seconds) > clock_check = 14400 > > # How much it can drift before we will correct it (in seconds) > max_drift = 5 > > > ############################################################################## > > # This section is for configuring the archive service. > > [StdArchive] > > # If the station hardware supports data logging then the archive > interval > # will be downloaded from the station. Otherwise, specify it (in > seconds). > archive_interval = 300 > > # If possible, new archive records are downloaded from the station > # hardware. If the hardware does not support this, then new archive > # records will be generated in software. > # Set the following to "software" to force software record generation. > record_generation = hardware > > # Whether to include LOOP data in hi/low statistics > loop_hilo = True > > # The data binding used to save archive records > data_binding = wx_binding > > > ############################################################################## > > # This section binds a data store to a database. > > [DataBindings] > > [[wx_binding]] > # The database must match one of the sections in [Databases]. > # This is likely to be the only option you would want to change. > database = archive_sqlite > # The name of the table within the database > table_name = archive > # The manager handles aggregation of data for historical summaries > manager = weewx.wxmanager.WXDaySummaryManager > # The schema defines the structure of the database. > # It is *only* used when the database is created. > schema = schemas.wview.schema > [[wd_binding]] > manager = weewx.manager.DaySummaryManager > schema = user.weewxwd3.schema > table_name = archive > database = weewxwd_sqlite > > > ############################################################################## > > # This section defines various databases. > > [Databases] > > # A SQLite database is simply a single file > [[archive_sqlite]] > database_type = SQLite > database_name = weewx.sdb > > # MySQL > [[archive_mysql]] > database_type = MySQL > database_name = weewx > [[weewxwd_mysql]] > database_name = weewxwd > database_type = MySQL > host = localhost > user = weewx > password = weewx > [[weewxwd_sqlite]] > database_name = weewxwd.sdb > root = %(WEEWX_ROOT)s > database_type = SQLite > > > ############################################################################## > > # This section defines defaults for the different types of databases. > > [DatabaseTypes] > > # Defaults for SQLite databases > [[SQLite]] > driver = weedb.sqlite > # Directory in which the database files are located > SQLITE_ROOT = /var/lib/weewx > > # Defaults for MySQL databases > [[MySQL]] > driver = weedb.mysql > # The host where the database is located > host = localhost > # The user name for logging in to the host > user = weewx > # The password for the user name (quotes guard against parsing > errors) > password = weewx > > > ############################################################################## > > # This section configures the internal weewx engine. > > [Engine] > > [[Services]] > # This section specifies the services that should be run. They are > # grouped by type, and the order of services within each group > # determines the order in which the services will be run. > prep_services = weewx.engine.StdTimeSynch > data_services = , > process_services = weewx.engine.StdConvert, > weewx.engine.StdCalibrate, weewx.engine.StdQC, > weewx.wxservices.StdWXCalculate, user.weewxwd3.WdWXCalculate > archive_services = weewx.engine.StdArchive, user.weewxwd3.WdArchive > restful_services = weewx.restx.StdStationRegistry, > weewx.restx.StdWunderground, weewx.restx.StdPWSweather, > weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, > user.meteotemplate.Meteotemplate > report_services = weewx.engine.StdPrint, weewx.engine.StdReport > > > ############################################################################## > > # Options for extension 'Weewx-WD' > [Weewx-WD] > data_binding = wd_binding > > > > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
